Tyco Electronics 17A2 manual Fingerprint Reader

Page 51

Fingerprint Reader

The fingerprint reader will be ELO part number E728123 (DigitalPersona U.are.U 4000B). The fingerprint reader is powered by the USB bus. The reader optically scans the fingerprint when the user touches the glowing window. Optical technology gives the highest quality fingerprint scans and reliability.

Table of Partial Fingerprint Reader Specifications:

 

 

Fingerprint Reader

DigitalPersona U.are.U 4000B

Power Supply

5.0Vdc +/- 0.25V

 

 

Current Draw - scanning mode

190 mA (typical)

Current Draw - idle mode

140 mA (typical)

 

 

Current Draw - suspend mode

1.5 mA (typical)

Image Resolution

512 dpi

Image Color

8-bit gray level

Scan capture size

14.6mm (nominal width) x 18.1mm

 

(nominal length)

 

 

Image capture speed

100 ms

USB type

1.0, 1.1, or 2.0

Operating Temperature

0oC to 40oC

ESD (Electrostatic Discharge)

up to 15kV mounted in case

 

 

Elo TouchSystems 17A2 User Guide 51

Image 51
Contents Touchcomputer User Guide Elo TouchSystems Touchcomputer User Guide LCD Multifunction TouchcomputerRevision D E926979 Elo TouchSystems Disclaimer Copyright c 2008 Tyco Electronics. All Rights ReservedTable of Contents Technical Support Unpacking Your Touchcomputer SetupFront View Rear View Product OverviewSide View Base Bottom View Display Orientation Display Orientation with Peripherals Language Selection Initial Turn-OnPage Time-zone selection Testing the Touchscreen Test DevicesCalibration Testing the Magnetic Stripe Reader MSR optional Testing in USB MSR Keyboard KB Emulation ModeTesting in USB MSR Human Interface Device HID Mode Converting MSR from Keyboard Emulation to HID and vice versa Testing the Customer Display optional Testing the Finger Print Reader optional Testing the Barcode Scanner optional Page Enabling 2-D Scanning Testing the Speaker Bar optional Testing the DVD Drive optionalChanging DVD region Testing the TV tuner optional Testing the Wireless Card optionalTesting the Cash Drawer Port Operation OSD Menu OSD ControlTo unlock the OSD OSD LockoutShortcut keys To lock the OSDTo lock the Power Power ControlPower Button Power LockoutUsing the I/O panel PS/2 Universal TV Tuner optionalKensingtonTM Lock Mount as shown Securing the Touchcomputer BaseMounting Option Snap off stand coverMounting Option Display Angle Adding Peripherals UpgradesMaintenance Waste Electrical and Electronic Equipment Weee Directive Care and Handling of Your TouchcomputerServicing the Hard Disk Drive and Compact Flash Card To Install the Hard Disk DriveTo Install the Compact Flash Card Recovering the Operating SystemTechnical Specifications RAM Touchcomputer SpecificationsPage COM1, COM2 ConnectorRS232 Mode RS422 Mode Pin Definitionfor COM2 onlyRS485 Mode Pin Definitionfor COM2 only RJ45 connector Pin Definition DB9 connector Pin DefinitionPower Input Pin Definition Control Cash Drawer Port Signal Definition and ControlPage Page Display Specifications Power Supply Specifications Touchscreen Specifications USB Version Peripherals SpecificationsMagnetic Stripe Reader MSR Customer DisplayFingerprint Reader Barcode Scanner One-Dimensional scanner specificationsOmni-Directional scanner Elo P/N E787026 specifications USB-SSI converter board Elo P/N E580321 specificationsSpeaker Bar DVD Drive TV Tuner Card Wireless CardAltitude Environmental SpecificationsTemperature Ranges HumidityTechnical Assistance Using the TouchcomputerUsing the Web Using the Phone Technical SupportElectrical Safety Information Regulatory InformationII. Emissions and Immunity Information Page III. Safety Label Warranty Page Check out Elo’s Website