Tyco Electronics 17A2 manual Using the I/O panel

Page 29

Using the I/O panel

The touchcomputer provides the following I/O interfaces for connecting a wide variety of compliant devices.

USB and Powered USB

There are four USB 2.0 type A ports, including one 12V powered USB 2.0 port.

Cash Drawer

There is one 12V cash drawer port with a six position register jack connector interface. For additional information, see the Cash Drawer Port Signal Definition and Control section on page 44.

Ethernet

There is one RJ45 ethernet port providing LAN capabilities

Serial

There are two serial ports with an 8 position registered jack connector interface. COM1 is set to RS232 mode. COM2 is selectable in the BIOS to RS232, RS422 or RS485 modes. Use the supplied DB9 adapter cable to change the interface to DB9.

Microphone Input

There is one 3.5mm microphone input jack for connecting an external microphone

Audio Output

There is one 3.5mm stereo audio output jack for connecting headphones or external powered speakers.

Elo TouchSystems 17A2 User Guide 29

Image 29

Contents Touchcomputer User Guide Revision D E926979 Elo TouchSystems Elo TouchSystems Touchcomputer User GuideLCD Multifunction Touchcomputer Disclaimer Copyright c 2008 Tyco Electronics. All Rights ReservedTable of Contents Technical Support Unpacking Your Touchcomputer SetupFront View Rear View Product OverviewSide View Base Bottom View Display Orientation Display Orientation with Peripherals Language Selection Initial Turn-OnPage Time-zone selection Calibration Testing the TouchscreenTest Devices Testing in USB MSR Human Interface Device HID Mode Testing the Magnetic Stripe Reader MSR optionalTesting in USB MSR Keyboard KB Emulation Mode Converting MSR from Keyboard Emulation to HID and vice versa Testing the Customer Display optional Testing the Finger Print Reader optional Testing the Barcode Scanner optional Page Enabling 2-D Scanning Changing DVD region Testing the Speaker Bar optionalTesting the DVD Drive optional Testing the TV tuner optional Testing the Wireless Card optionalTesting the Cash Drawer Port Operation OSD Menu OSD ControlShortcut keys OSD LockoutTo lock the OSD To unlock the OSDPower Button Power ControlPower Lockout To lock the PowerUsing the I/O panel KensingtonTM Lock PS/2 UniversalTV Tuner optional Mounting Option Securing the Touchcomputer BaseSnap off stand cover Mount as shownMounting Option Display Angle Adding Peripherals UpgradesMaintenance Waste Electrical and Electronic Equipment Weee Directive Care and Handling of Your TouchcomputerServicing the Hard Disk Drive and Compact Flash Card To Install the Hard Disk DriveTo Install the Compact Flash Card Recovering the Operating SystemTechnical Specifications RAM Touchcomputer SpecificationsPage RS485 Mode Pin Definitionfor COM2 only COM1, COM2 ConnectorRS232 ModeRS422 Mode Pin Definitionfor COM2 only Power Input Pin Definition RJ45 connector Pin DefinitionDB9 connector Pin Definition Control Cash Drawer Port Signal Definition and ControlPage Page Display Specifications Power Supply Specifications Touchscreen Specifications Magnetic Stripe Reader MSR Peripherals SpecificationsCustomer Display USB VersionFingerprint Reader Omni-Directional scanner Elo P/N E787026 specifications One-Dimensional scanner specificationsUSB-SSI converter board Elo P/N E580321 specifications Barcode ScannerSpeaker Bar DVD Drive TV Tuner Card Wireless CardTemperature Ranges Environmental SpecificationsHumidity AltitudeUsing the Web Using the Phone Using the TouchcomputerTechnical Support Technical AssistanceII. Emissions and Immunity Information Electrical Safety InformationRegulatory Information Page III. Safety Label Warranty Page Check out Elo’s Website