Tyan Computer S1854 manual Soft Power Connector, Creative Labs Audio Connectors optional

Page 18

Chapter 2

Board Installation

1-G Soft Power Connector

The Soft Power Connector is part of jumper block J16. The Trinity 400 uses the chipset for power management, including turning on and off the system. If the Power Button Function option in the BIOS Power Management Menu is set to On/Off (which is the default), pressing the power button once after the BIOS has booted up will turn the system on and off. If the Power Button Function option is set to Suspend, pressing the power button once will wake the system or send it to Suspend mode. In this case, you cannot turn the system off unless you shut down through the Windows operating system or you hold the power button down for four seconds.

1-H Hardware Reset Switch Connector Installation

The Reset switch on your case’s display panel provides you with the Hard- ware Reset function, which is the same as power on/off. The system will do a cold start after the Reset button is pushed. (J16 pin 7 & 8)

1-I Creative Labs Audio Connectors (optional)

There are four black 4-pin

 

connectors onboard which are

 

used for various peripherals’

 

audio signals. The digital signal

 

that comes in through these

 

connectors is directed through

 

the Creative Labs ES1373 PCI

 

sound chip, and the digital signal

CON3

is turned into an audio signal

(WOL)

which goes out through the

 

speaker. The TDA connector

CON2

(J21) is for modem audio; the

(WOR)

VIDEO connector is (J22); the CD

 

connector (J23) is for CD-ROMs.

 

J16

J12 (Speaker)

JP2(Clr CMOS)

1-J Chassis Intrusion Alarm Connector

The J7 connector is an intrusion alarm, that can be connected to the system chassis. When active (J7 is connected to the chassis), this alarm will alert the system administrator anytime someone opens the system’s case.

http://www.tyan.com

18

Image 18
Contents Tyan S1854 Motherboard User’s Manual RevisionTable of Contents Compliance Information Overview ChapterIcons Hardware Specifications/Features Creative Labs ES 1373 PCI Software SpecificationsDisk Drive & System I/O Audio S1854A onlyHelp resources Returning Merchandise for ServiceTechnical Support For Resellers OnlyThis page left blank intentionally Unpacking InstallationHow to install our products right...the first time What’s the first thing I should do?Installation Steps Do Notapplypowertothe Board Ifithas Been DamagedPin jumpers Off onMap of Motherboard Jumpers Map of S1854 Features CPU Setting Jumpers CPU Speed Settings Jumpers JP10, JP11, JP12, JP13Panel Connector Settings Jumper J16 Power LEDSoft Power Connector Creative Labs Audio Connectors optionalPower LED Connector Mounting the Motherboard in the ChassisInstalling Memory Install Pin Dimm Dimm Bank Total Installing the CPU and Cooling Fan Installing Socket 370 Type CPUsInstalling Slot1 Type CPUs Installing CPU Retention ModulesChapter Connecting IDE and Floppy Drives Removing CPUPin Installing Add-on Cards Connecting PS/2, USB, Serial & Parallel Devices Connecting Com and Printer Ports Connecting the Power Supply You are doneIntroduction to Setup Same as that displayed on your screenSetup Keys Case of Problems Main Setup Menu Setup VariationsChipset Features Setup Standard Cmos SetupBios Features Setup Power Management SetupStandard Cmos Setup DateTime Hard Disks Drive a VideoHalt On Bios Features Setup MemoryBios Feature Setup Default Settings Chart Setting Option Bios Default Setup DefaultBoot Sequence Settings ChartQuick Power On Self Test Virus WarningTypematic Rate Setting Boot Up NumLock StatusIDE HDD Block Mode Typematic Delay MsecPCI/VGA Palette Snoop Video Bios ShadowSecurity Option OS Select for Dram 64MBBank 0/1, 2/3, 4/5 Dram Timing Chipset Features SetupAdvanced Options Sdram Cycle LengthMemory Hole Chipset Features Setup Default Settings ChartSystem Bios Cacheable P2C/C2P ConcurrencyAGP Driving Value Video RAM CacheableAGP Aperture Size AGP Driving Control AGP-4xModePower Management Setup IRQ4COM1Power Management Power Saving FunctionPM Control by APM Video Off Option PM TimersHDDPowerDown Video Off MethodDozeMode Suspend ModeRTC Alarm Resume PM EventsProcessed. Secondary interrupts are typically IRQnPnP/PCI Configuration PnP / PCI Configuration Default Settings ChartPCI Delay Transaction PNP OS InstalledReset Configuration Data PCI#2 Access #1 RetryAGP Master 1 WS Read Assign IRQ for VGAIntegrated Peripherals Default Settings Chart Integrated PeripheralsIDE Primary/Secondary Master/Slave PIO IDE Prefetch ModeOn-Chip PCI IDE First/Second Channel IDE Primary/Secondary Master/Slave UdmaOnboard Parallel Mode Power on FunctionUart Mode Select KBC Input ClockUser Password Flash Writer UtilityBios Flash Memory Writer System Resources Beep CodesTroubleshooting System Problems Displayed Error MessagesError Message Explanation Error Message Explanation Interrupt channel 2 failed PostAppendix Appendix Doze mode, only the CPU’s speed is slowed Appendix Glossary Appendix Glossary Installing SECC2 CPUs -Option LowerTabsRetention Figure D RemoveCPUInstalling SECC2 CPUs Option Figure H Document # D1373-200 Jumper Settings Quick Reference See pages 16-19 for details on Jumpers

S1854 specifications

The Tyan Computer S1854 is a powerful motherboard designed specifically for demanding server and workstation applications. As a part of Tyan's extensive lineup, the S1854 stands out for its balance of performance, reliability, and expandability, making it an attractive option for businesses and professionals requiring robust computational capabilities.

One of the key features of the S1854 is its support for dual Intel Xeon processors. This design allows users to harness the power of up to 16 cores, which is essential for high-performance tasks such as virtualization, scientific simulations, and large data processing. The motherboard supports Intel's latest Xeon E5-2600 series CPUs, providing cutting-edge performance along with advanced features like Turbo Boost and Hyper-Threading.

The Tyan S1854 is built on the Intel C602 chipset, further enhancing its capabilities. The chipset offers reliable data transfers, increased memory bandwidth, and improved power management features. With support for up to 512 GB of ECC DDR3 memory across eight DIMM slots, the motherboard ensures data integrity and stability, which are critical for mission-critical applications.

Another important characteristic is the array of expansion options provided by the S1854. The motherboard includes multiple PCI Express slots, allowing for the installation of high-speed network cards, storage controllers, and GPU accelerators. This flexibility is essential for businesses that require customized configurations to meet their specific workload demands.

In terms of storage, the S1854 features an impressive variety of connectivity options, including six SATA III ports for standard hard drives and SSDs, as well as support for RAID configurations. This capability ensures data redundancy and improved performance, which are vital for server environments.

The S1854 is also designed with energy efficiency in mind. Tyan employs advanced thermal management technologies, including strategically placed heatsinks and fan headers, to ensure optimal cooling in even the most demanding conditions. This design reduces overall power consumption, leading to cost savings in operational budgets.

Overall, the Tyan Computer S1854 delivers a blend of performance, scalability, and reliability. Its support for dual Xeon processors, high-capacity ECC memory, extensive expansion capabilities, and energy-efficient design make it an ideal choice for businesses and professionals seeking a robust foundation for their computing needs. Whether in data centers or high-performance workstations, the S1854 is engineered to excel.