Tyan Computer S1854 manual Hard Disks

Page 39

HARD DISKS

The BIOS supports up to four IDE drives. This section does not show information about other IDE devices, such as a CD-ROM drive, or about other hard drive types, such as SCSI drives. Note: We recommend that you select type auto for all drives.

The BIOS can automatically detect the specifications and optimal operating mode of almost all IDE hard drives. When you select type auto for a hard drive, the BIOS detects its specifications during POST, every time the system boots. If you do not want to select drive type auto, other methods of selecting the drive type are available:

1.Match the specifications of your installed IDE hard drive(s) with the preprogrammed values for drive types 1 through 45.

2.Select User and enter values into each drive parameter field.

3.Use the IDE HDD Auto Dectection function in Setup.

Here is a brief explanation of drive specifications:

Type: The BIOS contains a table of pre-defined drive types. Each defined drive type has a specified number of cylinders, number of heads, write precompensation factor, landing zone, and number of sectors. Drives whose specifications do not accommodate any pre-defined type are classified as type user.

Size: Disk drive capacity (approximate). Note that this size is usually slightly greater than the size of a formatted disk given by a disk-checking program. Cyls: Number of cylinders

Head: Number of heads

Precomp: Write precompensation cylinder

Landz: Landing zone

Sector: Number of sectors

Mode: Auto, Normal, large, or LBA

Auto: The BIOS automatically determines the optimal mode.

Normal: Maximum number of cylinders, heads, and sectors supported are 1024, 16, and 63.

Large: For drives that do not support LBA and have more than 1024 cylinders.

LBA (Logical Block Addressing): During drive accesses, the IDE controller transforms the data address described by sector, head, and cylinder number into a physical block address, significantly improving data transfer rates. For drives with greater than 1024 cylinders.

S1854 Trinity 400

BIOS

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Motherboard User’s Manual Revision Tyan S1854Table of Contents Compliance Information Chapter OverviewIcons Hardware Specifications/Features Audio S1854A only Software SpecificationsDisk Drive & System I/O Creative Labs ES 1373 PCIFor Resellers Only Returning Merchandise for ServiceTechnical Support Help resourcesThis page left blank intentionally What’s the first thing I should do? InstallationHow to install our products right...the first time UnpackingDo Notapplypowertothe Board Ifithas Been Damaged Installation StepsOff on Pin jumpersMap of Motherboard Jumpers Map of S1854 Features CPU CPU Speed Settings Jumpers JP10, JP11, JP12, JP13 Setting JumpersPower LED Panel Connector Settings Jumper J16Creative Labs Audio Connectors optional Soft Power ConnectorMounting the Motherboard in the Chassis Power LED ConnectorInstalling Memory Install Pin Dimm Dimm Bank Total Installing Socket 370 Type CPUs Installing the CPU and Cooling FanInstalling CPU Retention Modules Installing Slot1 Type CPUsChapter Removing CPU Connecting IDE and Floppy DrivesPin Installing Add-on Cards Connecting PS/2, USB, Serial & Parallel Devices Connecting Com and Printer Ports You are done Connecting the Power SupplySame as that displayed on your screen Introduction to SetupSetup Keys Case of Problems Setup Variations Main Setup MenuPower Management Setup Standard Cmos SetupBios Features Setup Chipset Features SetupStandard Cmos Setup DateTime Hard Disks Drive a VideoHalt On Memory Bios Features SetupSetting Option Bios Default Setup Default Bios Feature Setup Default Settings ChartVirus Warning Settings ChartQuick Power On Self Test Boot SequenceTypematic Delay Msec Boot Up NumLock StatusIDE HDD Block Mode Typematic Rate SettingOS Select for Dram 64MB Video Bios ShadowSecurity Option PCI/VGA Palette SnoopSdram Cycle Length Chipset Features SetupAdvanced Options Bank 0/1, 2/3, 4/5 Dram TimingP2C/C2P Concurrency Chipset Features Setup Default Settings ChartSystem Bios Cacheable Memory HoleAGP-4xMode Video RAM CacheableAGP Aperture Size AGP Driving Control AGP Driving ValueIRQ4COM1 Power Management SetupPower Management Power Saving FunctionPM Control by APM Video Off Method PM TimersHDDPowerDown Video Off OptionPM Events Suspend ModeRTC Alarm Resume DozeModeIRQn Processed. Secondary interrupts are typicallyPnP / PCI Configuration Default Settings Chart PnP/PCI ConfigurationPCI#2 Access #1 Retry PNP OS InstalledReset Configuration Data PCI Delay TransactionAssign IRQ for VGA AGP Master 1 WS ReadIntegrated Peripherals Integrated Peripherals Default Settings ChartIDE Primary/Secondary Master/Slave Udma IDE Prefetch ModeOn-Chip PCI IDE First/Second Channel IDE Primary/Secondary Master/Slave PIOKBC Input Clock Power on FunctionUart Mode Select Onboard Parallel ModeFlash Writer Utility User PasswordBios Flash Memory Writer Beep Codes System ResourcesDisplayed Error Messages Troubleshooting System ProblemsError Message Explanation Interrupt channel 2 failed Post Error Message ExplanationAppendix Appendix Doze mode, only the CPU’s speed is slowed Appendix Glossary Appendix Glossary LowerTabs Installing SECC2 CPUs -OptionRetention RemoveCPU Figure DInstalling SECC2 CPUs Option Figure H Document # D1373-200 See pages 16-19 for details on Jumpers Jumper Settings Quick Reference

S1854 specifications

The Tyan Computer S1854 is a powerful motherboard designed specifically for demanding server and workstation applications. As a part of Tyan's extensive lineup, the S1854 stands out for its balance of performance, reliability, and expandability, making it an attractive option for businesses and professionals requiring robust computational capabilities.

One of the key features of the S1854 is its support for dual Intel Xeon processors. This design allows users to harness the power of up to 16 cores, which is essential for high-performance tasks such as virtualization, scientific simulations, and large data processing. The motherboard supports Intel's latest Xeon E5-2600 series CPUs, providing cutting-edge performance along with advanced features like Turbo Boost and Hyper-Threading.

The Tyan S1854 is built on the Intel C602 chipset, further enhancing its capabilities. The chipset offers reliable data transfers, increased memory bandwidth, and improved power management features. With support for up to 512 GB of ECC DDR3 memory across eight DIMM slots, the motherboard ensures data integrity and stability, which are critical for mission-critical applications.

Another important characteristic is the array of expansion options provided by the S1854. The motherboard includes multiple PCI Express slots, allowing for the installation of high-speed network cards, storage controllers, and GPU accelerators. This flexibility is essential for businesses that require customized configurations to meet their specific workload demands.

In terms of storage, the S1854 features an impressive variety of connectivity options, including six SATA III ports for standard hard drives and SSDs, as well as support for RAID configurations. This capability ensures data redundancy and improved performance, which are vital for server environments.

The S1854 is also designed with energy efficiency in mind. Tyan employs advanced thermal management technologies, including strategically placed heatsinks and fan headers, to ensure optimal cooling in even the most demanding conditions. This design reduces overall power consumption, leading to cost savings in operational budgets.

Overall, the Tyan Computer S1854 delivers a blend of performance, scalability, and reliability. Its support for dual Xeon processors, high-capacity ECC memory, extensive expansion capabilities, and energy-efficient design make it an ideal choice for businesses and professionals seeking a robust foundation for their computing needs. Whether in data centers or high-performance workstations, the S1854 is engineered to excel.
Top Page Image Contents