2.5– CMOS Reset (JP13)
| Pin_3 | Pin_1 | Default |
|
| ||
|
|
|
|
| Pin_3 | Pin_1 | Clear |
|
|
You can reset the CMOS settings by using this jumper if you have forgotten your system/setup password or need to clear system BIOS setting.
- Power off system and disconnect both power connectors from the motherboard
- Use jumper cap to close Pin_2 and Pin_3 for several seconds to Clear
CMOS
- Put jumper cap back to Pin_1 and Pin_2 (default setting)
Reconnect power & power on system
2.6 – S/PDIF Header (J1)
SPDIF _OUT
NC
KEY
GND
12
http://www.TYAN.com