Tyan Computer S2877 warranty Heatsink Installation Procedures, Type a CAM Lever Type Installation

Page 25

2.7 - Heatsink Installation Procedures

Type A: CAM LEVER (TYPE) INSTALLATION

1. After placing backplate and interface material under motherboard place heatsink retention frame on top of motherboard. Align plastic retention bracket screw holes with CPU back- plate standoffs.

Tighten screws to secure plastic retention bracket. Repeat for the other side. DO NOT OVER TIGHTEN.

2. After tightening screws secure metal clip to plastic retention bracket center tab. Repeat for the other side of heatsink.

3. After securing metal clip to plastic retention bracket center tab, push down on plastic clip to lock plastic clip to side tab.

25

http://www.tyan.com

Image 25
Contents Trademark CopyrightVersion Board Installation Table of Contents IntroductionBios Page Congratulations Hardware SpecificationsExpansion Slots Integrated FireWire Ieee 1394A Controller Anrf version onlyIntegrated I/O Ports Back Panel I/O PortsOS Operating System Support Software SpecificationsPage Board Installation Board Image Tiger K8WE S2877 Block Diagram Block DiagramBoard Parts, Jumpers and Connectors Jumper Legend Jumper/Connector Function SettingsFront Panel Header J139 Function DefaultClear Cmos Header J112 Chassis Intrusion Header J77 4 *FireWire IEEE1394A Enable/Disable Jumper *J147Pin-2 Pin-1Buzzer/External Speaker Header J14 5 *FireWire IEEE1394A Pin Header *J148/*J149Open Pin3 and Pin4 USB 2.0 Front Panel Headers J25/J140 7 COM2 Connector J42Open Closed Keyboard Lock Connector J13Gigabit LAN1/**LAN2 Front Panel Header J2/ **J3 S2877G2NR version11 **VGA ATI Rage XL Enable/ Disable Jumper **J85 13 *Front Panel Audio Header *P53 CPU FAN Connector J9/J37Chassis 3-pin FAN Connectors J36/J10 Chassis 4-pin FAN Connector J47CPU1 FAN CPU2 FAN 17 3-pin or 4-pin fan support selection jumper J5Installing the Processors Heatsink Retention Frame Installation Thermal Interface Material Type a CAM Lever Type Installation Heatsink Installation ProceduresType B Screw Retention Type Heatsink Finishing Installing the Heatsink Tips on Installing Motherboard in Chassis Installing the Memory CPU1 CPU2 DIMM-A1 DIMM-A2 DIMM-B1 DIMM-B2 Memory Installation Procedure Attaching IDE Drive Cable Attaching Drive CablesPage Installing Add-In Cards Onboard LAN LED Color Definition Connecting External DevicesTips on modifying I/O shielding for Anrf and G2NR version Installing the Power SupplyFinishing Up Applying power to the boardPage To select an item Bios Setup UtilityBios Legend Bar Bios Menu BarGetting Help Feature Option Description Bios Main MenuMenu Item Bios Advanced MenuHammer Configuration Sub-Menu Integrated Devices Sub-Menu DisabledAuto LimitEnabled Feature Option Description DisabledNV Configuration PCI Configuration Sub-Menu PCI Device, Slot # 1 ,2,3 Add On Onboard Device ControlAvailable PCI/PNP ISA UHB Region ExclusionPCI/PNP ISA IRQ Resource Exclusion Feature Option Description AvailableOther IDE Configuration Sub-MenuBoth Standard Primary Master/Slave, Secondary Master/SlaveFloppy Configuration Sub-Menu 3F8 6 I/O Device Configuration Sub-MenuNormal 378 Hardware Monitor Sub-MenuOutput only Primary19200 Console Redirection Sub-Menu38400 57600 115200 VT100Direct Watchdog Timer Option Sub-Menu~255 Memory Bios Memory MenuUshc Security MenuUser Bios Boot MenuALL PCI Scsi Boot Device PriorityEnabled Power MenuStay Off Bios Exit Menu Page Flash Utility Beep CodesMemory, Video, CPU Code Beeps / Description Bios Post CodeApic Code Beeps / Description Glossary Page Page Page Page Page Technical Support Returning Merchandise for ServiceDocument # D1681-101
Related manuals
Manual 77 pages 23.79 Kb