Accessing Multiple Partitions
Access the security system using the steps described in the Accessing Your Security System section of this manual.
The system will announce one or more messages to advise you of the status of the system. The system will then announce the list of partitions to which your Access Code is assigned. For example, the system may announce:
“Partition One is ready. To select Partition One press [1]” “Partition Two is ready. To select Partition Two press [2]” “Partition Three is ready. To select Partition Three press [3]”
To select a partition, press the [number key] for that partition. For example, press [1] to select Partition 1; press [2] to select Partition 2, and so on.
When a partition has been selected, the system will announce
“To turn Partition One on press [0]. For more options press [1]”
To arm the partition, press [0]. To use other functions on the partition, press [1]. Pressing [1] allows you to perform other functions such as Zone Bypassing or
4