Arming The System
How To Arm the System
Access the security system using the steps described in the Accessing Your Security System section of this manual.
Select a Partition to arm as described in the Accessing Partitions section of this manual.
If the selected partition is ready to be armed, the system will announce:
“To Turn Partition 1 on Enter Your Access code”
Enter your [Access Code]. The system will announce
“Turning Partition One on. Exit Delay in Progress. To turn partition One off, enter your Access Code”
If the selected partition is not ready to be armed, the system will announce
“To turn Partition One on enter your Access Code.
Secure the system before turning on”
When the “Secure system before turning on” message is heard, ensure that all zones on the partition are secure before trying to arm the partition.
At-Home Arming
When the system announces
“To Turn Partition 1 on Enter Your Access code”
Activate the
“To turn Partition One on without entry delay press [9]”
Press [9]. The system will announce
“Enter Your Access Code”
Enter your access code. The system will then announce
“Turning Partition One on. Exit Delay in progress”
The selected partition will now be armed in the
5