Trouble Conditions
The system continuously monitors a number of conditions that may affect system operation. If a trouble condition occurs, the regular keypads on the system will beep twice every ten seconds and their “Trouble” lights will come on. Trouble conditions will not be indicated on the telephone until the system is accessed through the telephone.
When a trouble condition is present, the system will announce
“Warning System Fault present”
The system may then announce one or more of the following
Message | Cause and What to Do |
“AC Power Trouble” Electrical power to the system has been interrupted. Check your fuse box or circuit breaker and ensure that the electrical circuit for the system is on. If this does not correct the problem, call for service.
“Phone Line Trouble” | Your system has detected a problem with the telephone line. If this |
| problem does not correct itself or occurs frequently, call for service. |
“Low Battery on | A battery in one of the wireless zone modules on your system is low. |
Zone {number}” | Call for service. |
“The Time and Date are | If all power to the system is interrupted (AC and battery), the system |
incorrect. To reset | clock and date will need to be reset. Press [✱][6], and the system will |
press star then six” | announce messages to allow you to enter the time and date. If you are |
| unsure as to the cause for the system power failure, call for service. |
“Warning. System Fault If this message and no further trouble description is announced, call Present, service is required” for service.
9