Tyco Escort 4580 How to Disarm the System, If An Alarm Sounds, Turning Partition One off

Page 6

Disarming The System

IMPORTANT

If you return to the premises and find that an alarm has occurred while you were away, it is possible that an intruder may still be on the premises. Do not enter the premises. Go to the nearest telephone and contact the authorities.

How to Disarm the System

To disarm your security system, access the security system using the steps described in the Accessing Your Security System section of this manual.

Select a Partition to disarm as described in the Accessing Partitions section of this manual.

If the selected partition is armed, the system will announce

“Partition One is on. To turn off, enter your Access Code”

Enter your Access Code, and the system will announce

“Turning Partition One off”

If there were no alarms while the system was armed, the system will announce

“No alarm memory”

When the system is disarmed, additional messages may be announced to advise you of the status of the system, or to allow you to select other partitions.

If An Alarm Sounds

Fire Alarm

Your installer will inform you if fire detection equipment has been installed and activated on your system.

Fire alarms will sound with a pulsing tone. If a fire alarm sounds, follow your emergency evacuation plan immediately. Refer to the guidelines for family escape planning at the back of this manual.

Intrusion Alarm

Intrusion alarms will sound with a continuous tone.

If an intrusion alarm sounds, an intruder may be on the premises. Go to a safe place immediately. If you are certain that the premises are safe, the alarm may be silenced from the telephone. Access the security system using the steps described in the Accessing Your Security System and Accessing Partitions sections of this manual.

If the alarm was unintentional, notify your monitoring station and/or the local authorities immediately to prevent an unnecessary response.

You can determine the source of an alarm by following the instructions in the “Alarm Memory” section of this manual. Once the source of the alarm has been corrected, your system can be armed again.

6

Image 6
Contents Enter your access code IntroductionAbout Your Security System Access Codes General System OperationRemote Access Accessing Your Security SystemLocal Access Accessing PartitionsAccessing Multiple Partitions To turn Partition One on press 0. For more options pressHow To Arm the System Arming The SystemAt-Home Arming Partition One is on. To turn off, enter your Access Code How to Disarm the SystemIf An Alarm Sounds No alarm memoryAlarm Memory There are number alarms in memory, Zones numberFor Alarm Memory press How to Bypass Zones Bypassing ZonesTrouble Conditions Zone numberHow to Reset Sensors Sensor Reset FeatureDoor Strike Feature Activating the Door StrikeSpecial Functions Door Chime FeatureEnabling the Door Chime Feature For Special Functions pressSetting the Time and Date PressVolume is low. To change the volume, press Volume and Speech RateFor Volume Control press For Speech Rate pressHow to Access Home Automation Functions Individual Item ControlFor Home Automation press Press To increase Press To decreaseFire Safety in the Home Household Fire SafetyFamily Escape Planning Limited Warranty Page Escort 4580 Version 1.0 ’Indice de charge de ce produit est