CEM/B/052
Product Highlights
Serial Reader/Device Compatibility on an IP System
The ECM improves communications by enabling traditional serial card readers/devices to be quickly and easily connected to an
RS485 Network Compatibility
A single ECM can be connected to a chain of up to 16 RS485 readers and
System Compatibility
The ECM can be used with the AC2000 SE (Standard Edition) or the AC2000 Lite access control systems.
Packaging Options
The ECM is supplied as a standalone boxed unit. A board only option is available to connect into a NCN device in an existing CEM Legacy System.
Windows Configuration
The ECM makes use of a Tibbo Ethernet module for connection to the Ethernet network. Tibbo supply a simple Device Server Toolkit (DST) application for setup and network configuration. Sample configuration files for standalone and legacy (ENCN) modes of operation are supplied.
TECHNICAL SPECIFICATIONS
Physical |
| Communication Interface | |
Size | 140 x 110 x 35mm (5.5 x 4.3 x 1.4”) | To Host | 10/100 |
Weight | 0.2Kg |
| Unshielded twisted pair Cable |
Housing | Plastic enclosure or PCB only | Connection | RJ45 |
Housing colour | Beige |
|
|
Power |
| To RS485 Card Reader | RS485 multidrop cable runs using using |
- Voltage | 12Vdc |
| Belden 8723 with maximum length of |
- Current | 250mA (excluding reader) |
| 1.2km without repeater |
Consumption |
| Connection | 2 part screw terminal |
Environmental |
| Product Codes |
|
Temperature |
| ||
|
| ECM/200/000 | ECM (Complete with PSU and Enclosure) |
LED Indicators | +12 Volts Power | ECM/200/B04 | ECM Board Only Module |
| RS485 Rx and Tx |
| (For use in CEM legacy Systems) |
Tibbo LED Indicators | Ethernet 100BaseT |
|
|
| Ethernet Link |
|
|
| Status Red |
|
|
| Status Green |
|
|
Functionality |
|
|
|
Inputs | 10/100MB Ethernet via RJ45 connector |
|
|
Outputs | RS232 via DB9 connector |
|
|
| RS485 via 2 part screw terminal |
|
|
Reader Power Output | 12V, limited to 750mA (MAX) to power a |
|
|
| single CEM reader. Excludes lock power |
|
|
Configuration | Configurable via Device Server Toolkit, |
|
|
| telnet or serial connection |
|
|
Product specifications and availability is subject to change without notice. Certain product names mentioned herein may be trade names and/or registered trademarks of their companies.
CEM Systems Ltd Unit 4 Ravenhill Business Park Ravenhill Road Belfast BT6 8AW Northern Ireland | www.cemsys.com |
Tel: +44 (0)28 9045 6767 Fax: +44 (0)28 9045 4535 email: cem.sales@tycoint.com |