Vantec UGT-IS602R user manual Erasing RAID Configuration Data

Erasing RAID Configuration Data

Note: The RAID controller stores RAID configuration data on all physical disks that are part of a virtual disk. RAID configuration data must be erased on the physical disk before it can be used with another virtual disk.

1.In the Topology pane, select Physical Disk (VD 0: Default > PD

0: ST3750330MS in Figure 14) and press Enter. A menu pops-up, as shown Figure 14.

2.Select Delete to delete the virtual disk, as shown in Figure 14.

3.Select Yes when prompted to confirm the erase operation.

UGT‐IS602R Page 18