Vantec UGT-IS602R user manual UGT‐IS602R

Page 31

3.Insert the CD driver bound with 2+1 SATA 6G & PATA PCI-E COMBO HOST CARD WITH RAID into your CD-ROM Drive, please select Marvell 91xx SATA 6G Controller (D:\UGT-IS602R\XP_2003_Vista_2008_7\Floppy32\mv91xx.inf), then press Next. (Change D:\ to match your CD-ROM drive letter)

4.Continue with Windows OS installation.

5.And there is an additional device Marvell 91xx Config SCSI Processor Device is detected when Windows starts for the first time.

6.Please insert the CD driver bound with 2+1 SATA 6G & PATA PCI-E COMBO HOST CARD WITH RAID into your CD-ROM Drive.

7.At the Windows desktop, click Start, then Run.

8.Type D:\UGT-IS602R\XP_2003_Vista_2008_7\Setup.exe, click OK. (Change D:\ to match your CD-ROM drive letter)

9.Follow the on-screen instructions to complete the installation.

10.After successful installation, the device is listed in the Device Manager as Marvell 91xx Config Device (under System Device)

UGT‐IS602R

Page 31

Image 31
Contents +1 Sata 6G & Pata PCI-E Combo Host Card with RAID Features and Benefits Package Contents SpecificationsSystem Requirements Layout Creating and Managing Virtual Disks Hardware InstallationConfiguration Wizard Confirm Disk Selection Configure Virtual Disk RAID Level Stripe Size Gigabyte Rounding Quick Init VD Name Create Virtual Disk Create Virtual Disk Confirmation Virtual Disk in Topology Pane Managing Virtual Disks Erasing RAID Configuration Data Erase RAID Configuration Data Virtual Disk Properties Degrade VD Rebuild Virtual Disk Select Replacement Disk Confirm Rebuild Virtual Disk Rebuild Status To pause the rebuild process Deleting Virtual Disk For Windows XP/Server Driver InstallationType D\UGT-IS602R\XP2003Vista20087\Setup.exe, click For Windows XP-x64/Server Type D\UGT-IS602R\XP2003Vista20087\Setup.exe, click For Windows Vista/2008/7 UGT‐IS602R For Windows Vista-x64/2008-x64/7-x64 For An Existing Installation Marvell RAID Utility MRU To Verify Driver InstallationUGT‐IS602R Warranty