Vantec UGT-IS602R user manual For Windows Vista/2008/7

OK. (Change D:\ to match your CD-ROM drive letter)

14.Follow the on-screen instructions to complete the installation.

15.After successful installation, the device is listed in the Device Manager as Marvell 91xx Config Device (under System Device)

For An Existing Installation

1.Please insert the CD driver bound with 2+1 SATA 6G & PATA PCI-E COMBO HOST CARD WITH RAID into your CD-ROM Drive.

2.At the Windows desktop, click Start, then Run.

3.Type D:\UGT-IS602R\XP_2003_Vista_2008_7\Setup.exe, click OK. (Change D:\ to match your CD-ROM drive letter)

4.Follow the on-screen instructions to complete the installation.

5.Restart Windows to complete the installation.

For Windows® Vista/2008/7

For A New Installation

1.Follow Microsoft’s Windows installation procedure.

2.At the Windows Setup screen, press Load Driver to install the driver.

UGT‐IS602R Page 30