Vantec UGT-IS602R user manual Erase RAID Configuration Data

Page 19

Figure 14 Erase RAID Configuration Data

Rebuilding Virtual Disk

Note: The 2+1 SATA 6G & PATA PCI-E COMBO HOST CARD WITH RAID BIOS supports manual rebuilding of RAID 1 virtual disks. The rebuild process is both initiated and complete in the BIOS. The Marvell RAID Utility (MRU), which runs in an OS environment, cannot be used to either initiate, resume, or complete the rebuild process. Spare physical disks are not supported.

To manually rebuild a RAID 1 virtual disk

1.When a virtual disk is degraded, the Status of a virtual disk is

UGT‐IS602R

Page 19

Image 19

Contents +1 Sata 6G & Pata PCI-E Combo Host Card with RAID Features and Benefits Package Contents SpecificationsSystem Requirements Layout Creating and Managing Virtual Disks Hardware InstallationConfiguration Wizard Confirm Disk Selection Configure Virtual Disk RAID Level Stripe Size Gigabyte Rounding Quick Init VD Name Create Virtual Disk Create Virtual Disk Confirmation Virtual Disk in Topology Pane Managing Virtual Disks Erasing RAID Configuration Data Erase RAID Configuration Data Virtual Disk Properties Degrade VD Rebuild Virtual Disk Select Replacement Disk Confirm Rebuild Virtual Disk Rebuild Status To pause the rebuild process Deleting Virtual Disk For Windows XP/Server Driver InstallationType D\UGT-IS602R\XP2003Vista20087\Setup.exe, click For Windows XP-x64/Server Type D\UGT-IS602R\XP2003Vista20087\Setup.exe, click For Windows Vista/2008/7 UGT‐IS602R For Windows Vista-x64/2008-x64/7-x64 For An Existing Installation Marvell RAID Utility MRU To Verify Driver InstallationUGT‐IS602R Warranty