Tut Systems XL-12000S manual Serial Session/Version ID Screen

XL-12000S

MANAGED, HIGH-SPEED NETWORK MODEM USER GUIDE

1.Go to the Call menu and select connect. You will see the Serial Session/Version ID screen (Figure 7.1).

m.To verify that you have correctly configured your PC’s serial port, press the <Enter> key and the XL-12000S Login Display screen (Figure 7.8) should appear.

n.If your terminal remains blank, press <Ctrl-X> and enter again. If it is still blank, make sure you have entered the correct settings in step seven above. Verify that you are using the correct cable and have a good connection. If you are still unable to view the Login Display screen, refer to section 10.0, “Troubleshooting”.

Figure 7.1 Serial Session/Version ID Screen

2.When Login is displayed press <Enter>. Ignore the request for a password. (Screen shots for this process are contained in sec- tion 7.8 and Appendix B)

3.In the Main Menu, select “C”.

4.In modem configuration change “Slave” to “Master” by typing “M” in the Master/Slave field to designate this modem as the Master. Press <Enter> and this modem is now the Master.

7.0 CONFIGURE THE MODEM TUT SYSTEMS 13