MANAGED,
The “Routing/Bridging” field in the Modem Configuration screen will be set to bridge_non_ip.
The static routing table fields in the Modem 1 Configuration would be:
Destination | Mask | Gateway | Hops |
192.168.4.0 | 255.255.255.0 | 192.168.3.2 | 1 |
For Modem 2:
The “LAN IP address” field in the Modem Configuration screen will be set to 192.168.4.1
The LAN “Subnet Mask” field in the Modem Configuration screen will be set to 255.255.255.0
The “DSL IP address” field in the Modem Configuration screen will be set to 192.168.3.2
The DSL “Subnet Mask” field in the Modem Configuration screen will be set to 255.255.255.0
The “Master/Slave” field in the Modem Configuration screen will be set to Slave.
The “Routing/Bridging” field in the Modem Configuration screen will be set to bridge_non_ip.
The static routing table fields in the Modem 2 Configuration would be:
Destination | Mask | Gateway | Hops |
192.168.2.0 | 255.255.255.0 | 192.168.3.1 | 1 |
4. Block Packets
This selection disables routing and bridging and blocks all user traffic. This option allows communication with the modem for diagnostic testing or configuration via Telnet or SNMP but does not pass any traffic. Use this feature for diagnosing network problems.
Note: No user pinging will work for testing purposes.
The examples above were provided as a simple guide. The XL- 12000S can be used in many other combinations. Other helpful hints when using the
7.0 CONFIGURE THE MODEM | TUT SYSTEMS 25 |