Tut Systems XL-12000S manual Modem Management Screen

Page 41

XL-12000S

MANAGED, HIGH-SPEED NETWORK MODEM USER GUIDE

Figure 7.10 Modem Management Screen

1.Tab to the LAN IP Address field. Type the IP address of the modem’s LAN interface.

2.Tab to the Subnet Mask field. Type the subnet mask of the modem’s LAN interface.

3.Tab to the Default Gateway field. Type the IP address of the modem’s default gateway.

4.Entries may be made into optional fields at this time. See Table 7.2 for detailed descriptions of each field.

5.Press <Enter> and modem will reboot.

6.After the modem reboots, you can Telnet to the modem from the LAN interface to complete configuration. If you choose to continue from the console port, skip the Telnet set-up section which follows and, instead, press <Enter> to return to the Login Display screen. Select <Enter> to reach the Main Menu.

7.0 CONFIGURE THE MODEM

TUT SYSTEMS 33

Image 41

Contents XL-12000S Print Warranty Summary Warranty PolicyIi TUT Systems Table of Contents Figures Tables Vi TUT Systems XL-12000S Product Overview Technical Specifications Description What’s in the BoxRJ-45 10Base-T Straight-through Cable InstallationInstallation TUT Systems 10Base-T Cable Front Panel Indicators Panel Indicators and ConnectorsPower LED Activity LEDsTUT Systems Panel Indicators and Connectors Console Port Rear Panel Indicators and Connectors10Base-T Link LED Power and Boot Up Sequence Quick Start Configure the ModemTUT Systems Configure the Modem Serial Session/Version ID Screen Choosing the Appropriate Bridging/ Routing Option Detailed ProceduresBasic Bridging Administration BuildingFor Modem Bridging Example Two Advanced Bridging Bridging Example Two Advanced BridgingBack to Table of Contents For Modem IP Routing Only Routing Example One Using a Router and Bridge CombinationFor Modem 2 Bridge Routing Example Two Using a Router and Router Combination Bridge Non-IP For ModemConfiguration used for the modems in Bridge Non-IP example Block Packets Cursor Movement and Data Entry User Interface Keyboard CommandsNavigation Between Screens KEY Description XL-12000S Keyboard CommandsHyperTerminal Procedures for Initial ConfigurationConfigure the Modem TUT Systems User Login Login DisplayLogin Display Screen Failed Login AttemptsModem Management Main Menu Display10 Modem Management Screen Field Description Modem Configuration Telnet Setup11 Modem Configuration Screen Configure the Modem TUT Systems Remote management session to the modem 12 Password Change Screen PasswordSpecific field information for the Password Change Screen Snmp Management Advanced Modem FeaturesTUT Systems Advanced Modem Features Dhcp Relay Agent Screen Modem Dhcp Relay AgentFrom the Main Menu select D Upgrade SoftwareTo install a new version Detailed Steps for Running Tutxlutil Tutxlutil /f upgrade-file /u username /p password target Modem Status Modem StatisticsModem Statistics TUT Systems Modem IP Packet Statistics Press Ctrl-X to return to the Main Menu Troubleshooting Troubleshooting TUT Systems Cannot Telnet to the modem Snmp cannot locate the modem No host named target was found Technical Support Equipment Return and Repair Maintenance and RepairTechnical Assistance and Customer Support Appendix a Pinout Assignments Appendix B Reference Screen Shots TUT Systems Appendix B Reference Screen Shots 11 Modem Configuration Screen Snmp Management Screen Upgrade Software Screen Modem IP Packet Statistics Screen Appendix C Measure Line Length Measuring Phone WireAppendix D Subnet Mask Table Appendix D Subnet Mask Table TUT Systems 232 Page TUT Systems