1. Introduction
The SATA/IDE-USB Adapter gives you the flexibility of connecting almost any type of drive to your computer via USB. SATA, 3.5” IDE, 5.25” IDE, and 2.5” IDE drives are all supported and can be easily hot-swapped to your system. The included external power adapter will allow you to power your drives outside your system giving you the ability to quickly add or swap between drives without opening your case. The SATA/IDE-USB adapter is like 3 drive to USB adapters built into one!
2. Specifications/Features:
SATA/IDE-USB Adapter:
Specifications:
• Interface: SATA to USB 2.0 3.5” IDE to USB 2.0 2.5” IDE to USB 2.0
•Dimensions: 70 x 43 x 10 mm
•Cable Length: 92cm (36in)
Features:
•Transfer Rates Up to 12Mbps With USB 1.1
•Transfer Rates Up to 480Mbps With USB 2.0
•Easily add storage to any system with USB
•Supports ATA/ATAPI-7
•Supports LBA-48 Addressing
•Hot-swappable: Plug and play without rebooting!