Vantec None manual Sata HDD

Page 8

Installing the SATA/IDE-USB Adapter for internal use with 2.5”/3.5” SATA Hard Drive:

1.Open computer case.

2.Insert drive and mount with screws.

3.Using a SATA cable, connect the SATA port of the SATA/IDE-USB Adapter to the SATA connector on the hard drive hard drive.

4.Connect either a 4-pin power connector or SATA power connector from power supply to hard drive. Do not connect both. (Do not need to use supplied power adapter for internal use)

5.Connect USB connector of SATA/IDE-USB Adapter to an available internal or external USB port.

6.Close computer case.

2.5” SATA HDD

3.5” SATA HDD

6

Image 8
Contents Page Package Contents Table of Contents SATA/IDE-USB Adapter Specifications/FeaturesIntroduction Preparing the hard drive Hardware InstallationSystem Requirements IDE HDD IDE HDD Sata HDD Driver Installation Mac OS Disconnecting the SATA/IDE-USB AdapterWindows 98SE/ME/XP/2000 Windows XP/2000 Creating a New PartitionWindows 98SE/ME Mac OS X Troubleshooting/FAQ Troubleshooting/FAQ Warranty Contact Vantec Thermal Technologies