Installing the SATA/IDE-USB Adapter for internal use with 2.5” IDE Hard Drive:
1.Open computer case.
2.Connect the smaller 44-pin IDE connector of the SATA/IDE-USB Adapter to the hard drive.
3.Connect 2.5” Power Cable Adapter to SATA/IDE Adapter. Connect a 4-pin power connector from power supply to 2.5” HDD Adapter. (Do not need to use supplied power adapter for internal use)
4.Connect USB connector of SATA/IDE-USB Adapter to an available internal or external USB port.
5.Close computer case.
2.5” IDE HDD
Installing the SATA/IDE-USB Adapter for internal use with 3.5”/5.25“ IDE Drive:
1.Open computer case and find an available 3.5”/5.25” bay.
2.Insert drive and mount with screws.
3.Connect the larger 40-pin IDE connector of the SATA/IDE-USB Adapter to the hard drive.
4.Connect a 4-pin power connector from power supply to hard drive. (Do not need to use supplied power adapter for internal use)
5.Connect USB connector of SATA/IDE-USB Adapter to an available internal or external USB port.
6.Close computer case.
3.5” IDE HDD