Vantec None manual System Requirements, Hardware Installation, Preparing the hard drive

3. System Requirements:

Intel Pentium II 350MHz-compatible or Apple G3 processor and greater Microsoft Windows 98SE/ME/2000/XP or Mac OS 8.6 and greater USB-equipped system For USB 2.0 speeds, the system must support USB 2.0 specifications

4. Hardware Installation:
Preparing the hard drive:
For 3.5”/5.25” IDE drives:	Set the hard drive jumpers to MASTER or
	SINGLE DRIVE ONLY. Please refer to the
	documentation included with your hard drive
	for information on jumper settings.
For 2.5“ IDE drives:	The MASTER configuration is typically jumperless.
For SATA drives:	No jumpers necessary.

3