Vector VEC018-AC owner manual Operating Tips, Rated Versus Actual Current Draw of Equipment

Page 12

OPERATING TIPS

The Power Force 50™ should only be operated in locations that meet the following criteria:

DRY - Do not allow water or other liquids to come into contact with the inverter.

COOL - Ambient air temperature should be between -20°C and 40°C - ideally between 15°C and 25°C (60 - 80°F). Do not place the inverter on or near a heating vent or any piece of equipment which is generating heat above room temperature. Keep the inverter away from direct sunlight, if at all possible.

VENTILATED - Keep the area surrounding the Power Force 50™ clear to ensure free air circulation around the unit. Do not place items on or over the inverter during operation. The unit will shut down if the internal temperature exceeds 90°C. Restart the unit once it cools down sufficiently.

SAFE - Do not use the Power Force 50™ near flammable materials or in any locations that may accumulate flammable fumes or gases.

Rated Versus Actual Current Draw of Equipment

Most electrical tools, appliances, electronic devices and audio/visual equipment have labels that indicate the power consumption in amps or watts. Be sure that the power consumption of the item to be operated is below 50 watts. If the power consumption is rated in amps, simply multiply by the AC volts (110) to determine the wattage.

Resistive loads are the easiest for the Power Force 50™ to run; however, it will not run larger resistive loads (such as electric stoves and heaters) which require far more wattage than the Power Force 50™ can deliver on a continuous basis. Inductive loads (such as TVs and stereos) require more current to operate than do resistive loads of the same wattage rating. Induction motors, as well as some TVs, may require 2 to 6 times their wattage rating to start up. The most demanding in this category are those that start under load, such as compressors and pumps. Testing is the only definitive way to determine whether a specific load can be started and how long it can run. For safety reasons, the unit will simply shut down if it is overloaded. To restart the unit after a shutdown due to overloading, momentarily turn off the power to the unit.

Note: The Power Force 50™ will not operate appliances and equipment that generate heat, such as hair dryers, microwave ovens, and toasters.

1 1

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Warranty Information Introduction Fig. aSystem Features Includes Vector Power Force 50 inverterRecharging From a 110-volt AC Power Source Recharging From a 12-volt DC Power SourceOperation Estimated run-timesVolt AC Operation Main Fuse Fig. BStorage IntroductionHOW the Power Force 50 Inverter Works Principle Of OperationPower Source Requirements Connection To LoadDo not Connect to AC Distribution Wiring Fuse ReplacementRechargeable Appliances Operating Tips Rated Versus Actual Current Draw of EquipmentBattery Operating Time TroubleshootingProtective Features of the Power Force Estimated Operation TimesProblem Television Interference Common Power Output ProblemsYear Extended Warranty Registration Form Cut here

VEC018-AC specifications

The Vector VEC018-AC is a state-of-the-art power inverter designed for those seeking a reliable and efficient energy conversion solution. This device is especially suited for both home use and mobile applications, where portable power is a necessity. With advanced features and robust characteristics, the VEC018-AC stands out in the marketplace.

One of the notable features of the Vector VEC018-AC is its ability to convert 12V DC power to 120V AC power, allowing users to operate standard household appliances and tools from a vehicle battery or solar panel system. The inverter has a maximum output of 180 watts, making it capable of handling light to moderate loads. This makes it an ideal choice for camping trips, tailgating, or emergency power supply situations.

The VEC018-AC incorporates advanced technologies to ensure safety and reliability. For instance, it is equipped with built-in safety mechanisms that protect against overload, over-voltage, and short circuits. This feature not only extends the lifespan of the inverter but also guarantees the safety of connected devices. The inverter also features an integrated cooling system that prevents overheating, ensuring consistent performance even under heavy loads.

Another key characteristic of the VEC018-AC is its compact and lightweight design. Weighing less than two pounds, it can be easily transported and stored, making it an excellent option for on-the-go power needs. The inverter also includes convenient AC outlets and USB ports, catering to a wide range of devices from smartphones to small appliances.

Moreover, the Vector VEC018-AC emphasizes user-friendliness with its simple plug-and-play operation. Users can quickly connect their devices without the need for complicated setups. This ease of use is complemented by clear indicator lights that provide real-time feedback on the operational status of the inverter.

In conclusion, the Vector VEC018-AC is a versatile and efficient power inverter that combines modern technology with user-centric design. Its safety features, portability, and broad compatibility make it an essential accessory for anyone in need of reliable portable power. Whether for leisure activities or emergency situations, the VEC018-AC is a dependable choice that delivers performance and peace of mind.
Top Page Image Contents