Vector VEC018-AC owner manual Storage, Introduction

Page 8

Storage

•Ideal storage temperature range is 50-68°F (10-20°C).

•Store the Pocket Generator™ in a cool, dry place with adequate ventilation for all-around air circulation.

•Avoid locations that are exposed to heating units, radiators, direct sunlight, or excessive humidity or dampness.

•To maximize useful life, fully charge the unit before storing.

•If storing at less than 50°F, recharge every six months; at 50-80°F, recharge every three months; at 80-104°F, recharge every 45 days.

•Always make sure the unit is disconnected from charger before storing.

SPECIFICATIONS: Pocket Generator™

AC Output

110-volts

DC Output

12-volts

Fuse

10 amps

Battery

12-volt 5 amp hour sealed lead acid, maintenance-free

Inverter

50-watts continuous/80 amps peak surge capacity

Weight:

4.60lbs.

Height:

6.25”

Depth:

4.00”

Width:

7.50”

Power Force 50™ Inverter

WARNING: Do not attempt to remove the inverter from the unit for any reason - it is hard-wired into the unit, and you may cause unnecessary damage to the unit and void the manufacturer’s warranty. In the event of any failure, refer to the warranty information at the back of this manual and return the complete unit for repair or replacement, or call the customer service department at Vector Manufacturing, Ltd. (954) 923-1155.

The Vector™ Power Force 50™ inverter supplied with the Pocket Generator™ is one in a series of the most advanced DC to AC inverters available today. With proper care and maintenance, it will deliver years of dependable service. For easy reference, see sections titled:

Introduction

How the Power Force 50™ Inverter Works

Power Source Requirements

Fuse Replacement

Operating Tips

Troubleshooting

Specifications

7

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Warranty Information Introduction Fig. aSystem Features Includes Vector Power Force 50 inverterRecharging From a 110-volt AC Power Source Recharging From a 12-volt DC Power SourceOperation Estimated run-timesVolt AC Operation Main Fuse Fig. BStorage IntroductionHOW the Power Force 50 Inverter Works Principle Of OperationPower Source Requirements Connection To LoadRechargeable Appliances Do not Connect to AC Distribution WiringFuse Replacement Operating Tips Rated Versus Actual Current Draw of EquipmentBattery Operating Time TroubleshootingProtective Features of the Power Force Estimated Operation TimesProblem Television Interference Common Power Output ProblemsYear Extended Warranty Registration Form Cut here

VEC018-AC specifications

The Vector VEC018-AC is a state-of-the-art power inverter designed for those seeking a reliable and efficient energy conversion solution. This device is especially suited for both home use and mobile applications, where portable power is a necessity. With advanced features and robust characteristics, the VEC018-AC stands out in the marketplace.

One of the notable features of the Vector VEC018-AC is its ability to convert 12V DC power to 120V AC power, allowing users to operate standard household appliances and tools from a vehicle battery or solar panel system. The inverter has a maximum output of 180 watts, making it capable of handling light to moderate loads. This makes it an ideal choice for camping trips, tailgating, or emergency power supply situations.

The VEC018-AC incorporates advanced technologies to ensure safety and reliability. For instance, it is equipped with built-in safety mechanisms that protect against overload, over-voltage, and short circuits. This feature not only extends the lifespan of the inverter but also guarantees the safety of connected devices. The inverter also features an integrated cooling system that prevents overheating, ensuring consistent performance even under heavy loads.

Another key characteristic of the VEC018-AC is its compact and lightweight design. Weighing less than two pounds, it can be easily transported and stored, making it an excellent option for on-the-go power needs. The inverter also includes convenient AC outlets and USB ports, catering to a wide range of devices from smartphones to small appliances.

Moreover, the Vector VEC018-AC emphasizes user-friendliness with its simple plug-and-play operation. Users can quickly connect their devices without the need for complicated setups. This ease of use is complemented by clear indicator lights that provide real-time feedback on the operational status of the inverter.

In conclusion, the Vector VEC018-AC is a versatile and efficient power inverter that combines modern technology with user-centric design. Its safety features, portability, and broad compatibility make it an essential accessory for anyone in need of reliable portable power. Whether for leisure activities or emergency situations, the VEC018-AC is a dependable choice that delivers performance and peace of mind.
Top Page Image Contents