Vector VEC018-AC owner manual HOW the Power Force 50 Inverter Works, Principle Of Operation

Page 9

INTRODUCTION

The Power Force 50™ supplies 50-watts of continuous power, with an 80-watt peak, via a household-type outlet that is ready to deliver 110-volt AC power whenever and wherever it is needed. Simply, fully charge before use and turn ON the power switch to operate small electronic devices such as laptop computers, portable radio/cassette/CD players, color TVs (up to 50 watts), cellular phone and camcorder battery chargers, and more.

The Power Force 50™ is equipped with an ON/OFF switch and power/charging indicator light. The AC receptacle is fully marinized, weather-proof and fused. Added safety features include:

•electronic circuit protection that prevents damage due overloading or insufficient ventilation;

•automatic shutdown to prevent damage to vehicle’s battery.

Please read the following information carefully before use, to ensure reliable service and complete safety. Pay particular attention to the CAUTION and WARNING statements that are provided.

HOW THE Power Force 50™ INVERTER WORKS

The Power Force 50™ inverter is an electronic device that converts low voltage DC (direct current) electricity from a battery to standard 110-volt AC (alternating current) household power. In designing the Power Force 50™, Vector™ has incorporated design techniques previously employed in computer power supplies. The result of these design innovations is a smaller, lighter and easier-to-use power inverter.

Principle Of Operation

The Power Force 50™ inverter converts power in two stages. The first stage is a DC-to-DC conversion process that raises the low voltage DC at the inverter input to 14.5-volts DC. The second stage is the actual inverter stage that converts the high voltage DC into 110-volts, 60 Hz AC.

The DC-to-DC converter stage uses modern high frequency power conversion techniques that have replaced the bulky transformers found in less technologically advanced models. The inverter stage uses advanced power MOSFET transistors in a full bridge configuration. This ensures excellent overload capability and the ability to operate reactive loads like lamp ballasts and small induction motors.

Figure 1.

Vector™ Power Force 50 ™

Inverter - Principle of

Operation

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Warranty Information Fig. a IntroductionIncludes Vector Power Force 50 inverter System FeaturesRecharging From a 12-volt DC Power Source Recharging From a 110-volt AC Power SourceEstimated run-times OperationVolt AC Operation Fig. B Main FuseIntroduction StoragePrinciple Of Operation HOW the Power Force 50 Inverter WorksConnection To Load Power Source RequirementsDo not Connect to AC Distribution Wiring Fuse ReplacementRechargeable Appliances Rated Versus Actual Current Draw of Equipment Operating TipsTroubleshooting Battery Operating TimeProtective Features of the Power Force Estimated Operation TimesCommon Power Output Problems Problem Television InterferenceYear Extended Warranty Registration Form Cut here

VEC018-AC specifications

The Vector VEC018-AC is a state-of-the-art power inverter designed for those seeking a reliable and efficient energy conversion solution. This device is especially suited for both home use and mobile applications, where portable power is a necessity. With advanced features and robust characteristics, the VEC018-AC stands out in the marketplace.

One of the notable features of the Vector VEC018-AC is its ability to convert 12V DC power to 120V AC power, allowing users to operate standard household appliances and tools from a vehicle battery or solar panel system. The inverter has a maximum output of 180 watts, making it capable of handling light to moderate loads. This makes it an ideal choice for camping trips, tailgating, or emergency power supply situations.

The VEC018-AC incorporates advanced technologies to ensure safety and reliability. For instance, it is equipped with built-in safety mechanisms that protect against overload, over-voltage, and short circuits. This feature not only extends the lifespan of the inverter but also guarantees the safety of connected devices. The inverter also features an integrated cooling system that prevents overheating, ensuring consistent performance even under heavy loads.

Another key characteristic of the VEC018-AC is its compact and lightweight design. Weighing less than two pounds, it can be easily transported and stored, making it an excellent option for on-the-go power needs. The inverter also includes convenient AC outlets and USB ports, catering to a wide range of devices from smartphones to small appliances.

Moreover, the Vector VEC018-AC emphasizes user-friendliness with its simple plug-and-play operation. Users can quickly connect their devices without the need for complicated setups. This ease of use is complemented by clear indicator lights that provide real-time feedback on the operational status of the inverter.

In conclusion, the Vector VEC018-AC is a versatile and efficient power inverter that combines modern technology with user-centric design. Its safety features, portability, and broad compatibility make it an essential accessory for anyone in need of reliable portable power. Whether for leisure activities or emergency situations, the VEC018-AC is a dependable choice that delivers performance and peace of mind.
Top Page Image Contents