Vector VEC018-AC owner manual Problem Television Interference, Common Power Output Problems

Page 14

Common Audio/Visual Problems

Problem: Buzzing Sound In Audio Systems

Some inexpensive stereo systems and “boom boxes” emit a buzzing sound from their speakers when operated from the Power Force 50™ inverter, because the power supply in the electronic device does not adequately filter the modified sine wave produced by the inverter. The only solution to this problem is to use a sound system that has a higher quality power supply internally.

Problem: Television Interference

The Vector™ Power Force 50™ is shielded to minimize interference with TV signals. However, in some instances, some interference may still be visible, particularly when the TV signal is weak. Try the following corrective measures:

•Position the Pocket Generator™ as far as possible from the TV set, the antennae, and the antennae cables. Use an extension cable, if necessary.

•Adjust the orientation of the Pocket Generator™, the antennae cables, and the TV power cord to minimize interference.

•Make sure that the antennae feeding the TV provides an adequate (“snow free”) signal and that high quality, shielded antennae cable is used.

Common Power Output Problems

Problem: Lack Of Power Output

Possible Causes

Recommendations

Inverter not adequately

Turn power inverter switch OFF and

warmed up.

then ON again. Repeat if necessary.

Battery voltage

Recharge or replace Pocket Generator™ battery.

below 10 volts.

 

Equipment being operated

Reduce load to maximum 50 watts.

draws too much power.

 

Inverter in thermal

Allow inverter to cool down. Ensure that there is

shutdown condition.

adequate ventilation around unit, and load is no

 

more than 50 watts for continuous operation.

Main fuse failed (blown).

Replace Pocket Generator™ fuse.

Problem: Low Output Voltage

Using average reading voltmeter. Inverter is overloaded.

Input voltage below 10.5 volts.

Use true RMS reading meter.

Reduce load to 50 watts max. to maintain regulation. Keep input voltage above 10.5 volts to maintain regulation.

SPECIFICATIONS: Power Force 50™ Inverter

MAX. CONTINUOUS POWER

. 50

WATTS

PEAK SURGE CAPACITY

. . . . . 80

WATTS

MAX.EFFICIENCY . . . . . . . . . . . . . ±80%

NO LOAD CURRENT DRAW

. . . . <0.06A

INPUT VOLTAGE RANGE

. . . 10 - 15 VDC

LOW VOLTAGE SHUTDOWN ACTIVATION .10.0 VOLTS WAVE FORM . . . . . . . . . . . . . . . . MAX. SINE WAVE

# OF AC RECEPTACLES . . . . . . . . . . . . . . . . . . ONE FUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 AMP

1 3

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Warranty Information Introduction Fig. aSystem Features Includes Vector Power Force 50 inverterRecharging From a 110-volt AC Power Source Recharging From a 12-volt DC Power SourceOperation Estimated run-timesVolt AC Operation Main Fuse Fig. BStorage IntroductionHOW the Power Force 50 Inverter Works Principle Of OperationPower Source Requirements Connection To LoadRechargeable Appliances Do not Connect to AC Distribution WiringFuse Replacement Operating Tips Rated Versus Actual Current Draw of EquipmentProtective Features of the Power Force Battery Operating TimeTroubleshooting Estimated Operation TimesProblem Television Interference Common Power Output ProblemsYear Extended Warranty Registration Form Cut here

VEC018-AC specifications

The Vector VEC018-AC is a state-of-the-art power inverter designed for those seeking a reliable and efficient energy conversion solution. This device is especially suited for both home use and mobile applications, where portable power is a necessity. With advanced features and robust characteristics, the VEC018-AC stands out in the marketplace.

One of the notable features of the Vector VEC018-AC is its ability to convert 12V DC power to 120V AC power, allowing users to operate standard household appliances and tools from a vehicle battery or solar panel system. The inverter has a maximum output of 180 watts, making it capable of handling light to moderate loads. This makes it an ideal choice for camping trips, tailgating, or emergency power supply situations.

The VEC018-AC incorporates advanced technologies to ensure safety and reliability. For instance, it is equipped with built-in safety mechanisms that protect against overload, over-voltage, and short circuits. This feature not only extends the lifespan of the inverter but also guarantees the safety of connected devices. The inverter also features an integrated cooling system that prevents overheating, ensuring consistent performance even under heavy loads.

Another key characteristic of the VEC018-AC is its compact and lightweight design. Weighing less than two pounds, it can be easily transported and stored, making it an excellent option for on-the-go power needs. The inverter also includes convenient AC outlets and USB ports, catering to a wide range of devices from smartphones to small appliances.

Moreover, the Vector VEC018-AC emphasizes user-friendliness with its simple plug-and-play operation. Users can quickly connect their devices without the need for complicated setups. This ease of use is complemented by clear indicator lights that provide real-time feedback on the operational status of the inverter.

In conclusion, the Vector VEC018-AC is a versatile and efficient power inverter that combines modern technology with user-centric design. Its safety features, portability, and broad compatibility make it an essential accessory for anyone in need of reliable portable power. Whether for leisure activities or emergency situations, the VEC018-AC is a dependable choice that delivers performance and peace of mind.
Top Page Image Contents