User Access Control

NTI UNIMUX MULTI-USER KVM SWITCH

To enter the Access Control list for a user, press A from the User Account screen for that user. From the Access Control list the administrator can:

•select all ports to have access to

•deselect all ports so that none can be connected to

•select only a limited number of ports to be accessed

The Access Control list is a check list with all the port numbers displayed

•unchecked box = the corresponding port is not in the access list

• checked box = the corresponding port is in the access list

Function	Keystroke

Toggle the state of the selected	Spacebar
check box

Select the next or previous port	up or down arrow

Quickly place check marks in all	A
boxes

Quickly remove check marks from all	N
boxes

Open Help window for this topic	F1

Exit and return to previous menu	Esc
Changes made will be saved
automatically

Figure 25- Access Control list

Change Administrator Password

To change the Administrator Password, press <C> from the Administration menu.

The Admin Password menu (see Figure 26) enables the administrator to change his password. Two edit fields are available, one for password, the other for verify password. The password can be up to 15 characters in length.

Note: The default password for the administrator is “nti”.

Function	Keystroke

Switch between Password and	Tab
Confirm (password) fields

Add character to password string	A-Z, 0-9
or confirm string	(upper or lower case)

Delete previous character in	Backspace
edited string

Save new password. (The	S
administrator will be prompted
for a Yes or No confirmation)

Exit and return to previous menu	Esc

Figure 26- Administrator password menu

Note: If the confirmation password does not match the first password entered, the message “INVALID PASSWORD” will be displayed when you try to save it.