Tyco 0-1591099-x manual Management Using The Console, Configuring the Console Interface

Page 11

24 Port Stackable Managed Switch – User Guide

Page

11

Management Using The Console

Configuring the Console Interface

When the connection between Switch and PC is complete, turn on the PC and run a terminal emulation program such as Hyper Terminal and configure its communication parameters to match the following default characteristics of the console port:

Baud Rate: 9600 bps

Data Bits: 8

Parity: none

Stop Bit: 1

Control flow: None

Figure 9. Communication

parameters settings

Figure 10. Initial login screen

After setting the communication parameters, click “OK“ on the PC. Press <enter> and when the screen displays the initial login screen as above, enter root in lower case letters for both the User Name and Password. The Main Menu Screen of console management appears.

NOTE: If an IP address has been assigned to the Switch then it also possible to manage the Switch remotely using Telnet. The management menu structure is exactly the same as from console.

Product Number 0-1591099-x

© Tyco Electronics 2005

Issue 1

Image 11

Contents Port Stackable Managed Switch User Guide Disclaimer FeaturesIntelligent Management Features Technical Support and Service Package Contents Snmp Network Management Console and Telnet ManagementWeb Based Management Expansion Slot Hardware DescriptionFront Panel 10/100Base-TX Auto MDI/MDIX RJ-45 PortsRear Panel LED IndicatorsStatus Description Mounting the Switch InstallationRack-mounted Installation Quick Start Guide Connecting to the SwitchConfiguring the Console Interface Management Using The ConsoleMain Menu Screen Menu NavigationPort Status Status and CountersPort counter Screen Port CountersSystem Information Screen System InformationSwitch Configuration Screen Switch ConfigurationDevice Information Administration ConfigurationIP Configuration Screen IP ConfigurationPassword Configuration Screen Change User Name and PasswordPort Negotiation Port ConfigurationSelecting the required Port Attribute Port StatePriority Port Flow Control FCBack Pressure BP Bandwidth In/OutTrunk Configuration Screen Trunk ConfigurationPort Mirroring Screen Port Mirroring ConfigurationPort Based, 802.1Q Vlan ConfigurationVlan Port Membership Port Based VlanVlan Name Vlan Group IDIEEE802.1Q Vlans Member Create Vlan GroupProtocol Vlan Edit/Delete Vlan Group Group Sorted ModeModify the Egress Mapping Priority ConfigurationModify the Egress Weighting All MAC Addresses MAC Address ConfigurationStatic MAC Address Filtering MAC AddressBroadcast Storm Filter Misc ConfigurationMAC Address Aging Time IP Stacking Mode Max Bridge Transmit Delay BoundLow Queue Delay Bound Low Queue Max Delay TimeRstp Configuration Protocol Related ConfigurationPer Port Status Rstp SetupSystem Configuration Per Port SettingTrap Managers Snmp ConfigurationSystem Options Community StringsWorking Ports Lacp ConfigurationLacp State Activity Screen State ActivityGroup Status IGMP/GVRP Configuration802.1x Setup 802.1x ConfigurationPer Port Setting Save Configuration System Reset ConfigurationIP Stacking IP Stacking ConfigurationWeb Login Screen IP Stacking Screen Backup MasterWeb Based Management Configuring The Switch for Web Based ManagementWeb Browser Home Page Screen Port Status Screen Port Statistics Screen Port Statistics ScreenConfiguration Backup Administrator ScreenSave Configuration Tftp Update FirmwareIP Stacking Panel ListCPU ARM-7 Product SpecificationsContact Order CodesHardware Description Create Vlan Group Vlan Name Protocol Related Configuration Order Codes