Tyco 0-1591099-x manual Lacp State Activity Screen

Page 37

24 Port Stackable Managed Switch – User Guide

Page

37

Having selected working ports from the LACP Configuration screen the above is displayed. Select <edit> from the action line and enter the number of ports to be working port. Press <esc> to return to the action line and <apply> to save the configuration.

State Activity

If a LACP trunk has been configured it is possible to set the port to the following modes:

•Active (default) – The port automatically sends LACP packet to the neighbor device to establish a trunk connection

•Passive – The port waits for a LACP packet from the neighbor device before establishing a LACP trunk connection.

NOTE: One or both ends of the trunk link must be set to ‘Active’.

Figure 33. LACP State Activity Screen

After selecting this option from the LACP configuration the screen above will appear. Now select <edit> from the action line. Use the <tab> key to highlight the port to be modified and press the <spacebar> to toggle between Active and Passive modes. Having made the selection press <esc> to return to the action line and <apply> to save the configuration.

Product Number 0-1591099-x

© Tyco Electronics 2005

Issue 1

Image 37

Contents Port Stackable Managed Switch User Guide Intelligent Management Features FeaturesDisclaimer Technical Support and Service Package Contents Web Based Management Console and Telnet ManagementSnmp Network Management Front Panel Hardware Description10/100Base-TX Auto MDI/MDIX RJ-45 Ports Expansion SlotStatus Description LED IndicatorsRear Panel Mounting the Switch InstallationRack-mounted Installation Quick Start Guide Connecting to the SwitchConfiguring the Console Interface Management Using The ConsoleMain Menu Screen Menu NavigationPort Status Status and CountersPort counter Screen Port CountersSystem Information Screen System InformationSwitch Configuration Screen Switch ConfigurationDevice Information Administration ConfigurationIP Configuration Screen IP ConfigurationPassword Configuration Screen Change User Name and PasswordSelecting the required Port Attribute Port ConfigurationPort State Port NegotiationBack Pressure BP Port Flow Control FCBandwidth In/Out PriorityTrunk Configuration Screen Trunk ConfigurationPort Mirroring Screen Port Mirroring ConfigurationPort Based, 802.1Q Vlan ConfigurationVlan Name Port Based VlanVlan Group ID Vlan Port MembershipIEEE802.1Q Vlans Protocol Vlan Create Vlan GroupMember Edit/Delete Vlan Group Group Sorted ModeModify the Egress Weighting Priority ConfigurationModify the Egress Mapping Static MAC Address MAC Address ConfigurationFiltering MAC Address All MAC AddressesMAC Address Aging Time Misc ConfigurationBroadcast Storm Filter Low Queue Delay Bound Max Bridge Transmit Delay BoundLow Queue Max Delay Time IP Stacking ModeRstp Configuration Protocol Related ConfigurationSystem Configuration Rstp SetupPer Port Setting Per Port StatusSystem Options Snmp ConfigurationCommunity Strings Trap ManagersWorking Ports Lacp ConfigurationLacp State Activity Screen State ActivityGroup Status IGMP/GVRP Configuration802.1x Setup 802.1x ConfigurationPer Port Setting Save Configuration System Reset ConfigurationIP Stacking IP Stacking ConfigurationWeb Login Screen IP Stacking Screen Backup MasterWeb Based Management Configuring The Switch for Web Based ManagementWeb Browser Home Page Screen Port Status Screen Port Statistics Screen Port Statistics ScreenSave Configuration Administrator ScreenTftp Update Firmware Configuration BackupIP Stacking Panel ListCPU ARM-7 Product SpecificationsContact Order CodesHardware Description Create Vlan Group Vlan Name Protocol Related Configuration Order Codes