Tyco 0-1591099-x manual Hardware Description, Front Panel, 10/100Base-TX Auto MDI/MDIX RJ-45 Ports

24 Port Stackable Managed Switch – User Guide Page 6

Hardware Description

The 24 Stackable Managed Switch has fixed 24-port auto-sensing Ethernet RJ-45 connectors, and one expansion slot that can support a range of optional modules. These optional modules enable the Switch to support Gigabit copper and fibre optic circuits.

Front Panel

The Front Panel of the Switch consists of 24 auto-sensing 10/100Mbs Ethernet ports, one optional expansion slot and a console port. The LED Indicators are also located on the front panel of the Switch.

Figure2. The Front panel of 24 Port Stackable Managed Switch

10/100Base-TX Auto MDI/MDIX RJ-45 Ports

The 24 10/100Mbps auto-sensing ports can support 10Base-T or 100Base-TX device connection. The auto-MDI/MDIX function enables the direct connection to another Switch or workstation without the need to select either a straight or cross-over cable.

Expansion Slot

The Switch can support one of the following expansion modules:

•Single 100Fx SC Multimode Fibre

•Single 100Fx ST Multimode Fibre

•Single 100Fx SC Singlemode Fibre

•Dual Gigabit Multimode Sx

•Dual Gigabit Singlemode Lx

•Dual Gigabit Copper 1000BaseT

Console Port

The Switch can be fully managed using the console port connected to a PC using the supplied RS-232 cable.

Product Number 0-1591099-x © Tyco Electronics 2005 Issue 1