Perle Systems S-110P-SFP, S-110PP Powering Options Jumper Settings, UTP copper Power PoE, PoE+

Page 4

UTP (copper) Power

PoE

∙IEEE 802.3af (PoE) up to 15.4 Watts for the UTP port.

PoE+

∙IEEE 802at-2009 (PoE+)

∙Up to 30 Watts on UTP port

∙PoE+ models will also support 802.3af PDs (Type 1) and PoE+ PDs (Type 2)

Powering Options Jumper Settings

Note: The factory settings for Power Sourcing Pinouts will work for most installations as 802.3a and 802at-2009 ( POE/POE+) devices will detect and sync to the correct POE option. However, in the rare case that you need to modify the settings, the procedure is below.

In order to select a powering option, the Power Options Jumper settings must be set. Each copper port has a set of Power Option jumpers. To access the Powering Options Jumper settings, unscrew the six side screws on the case and remove the cover plate. Locate the Power Option jumper set and strap the option pins as detailed below.

4	Perle PoE/PoE+ 10/100 Ethernet Media Converter
	Installation Guide

Image 4

Contents Installation Guide 110P 110PP 110P-SFPOverview POE/POE+Installation Power Sourcing PinoutsUTP copper Power PoE Powering Options Jumper SettingsPoE+ DIP Switches BankAuto-negotiation copper Switch DIP Switch Settings BankSwitch Position Copper Port Switch Position Mode Link Pass-Through Mode SwitchLink Pass-Through Behaviour Far End Fault Switch PSE Enable Copper Switch 4Switch Position Fiber Port Switch Position TypePD Power Reset Switch Loopback Fiber SwitchDuplex Copper Switch Speed Copper SwitchDuplex Fiber Switch Installing the Duplex Fiber Cable Installing the SFP Fiber ModuleAuto/MDIX Switch Installing the Copper Cable Installing the Simplex Fiber CableAttaching the Power Cord Strain Relief Clip Powering up the Perle Media Converter Status LED OperationLED Pattern Error conditions Auto-MDIX Other FeaturesPause Ieee 802.3xy Troubleshooting GeneralNo connectivity MethodNo Power to the PD Technical Specifications Fiber Optic SpecificationsFiber Cabling Requirements Ethernet Copper Cabling RequirementsCompliance Information FCCWarranty / Registration Contacting Technical Support

S-110PP-SFP, S-110P, S-110P-SFP, S-110PP specifications

Perle Systems is renowned for delivering robust networking solutions, particularly its series of media converters and network devices. Among these, the Perle S-110PP, S-110P-SFP, S-110P, and S-110PP-SFP stand out due to their remarkable features and technologies tailored for various networking requirements.

The Perle S-110PP is a PoE (Power over Ethernet) media converter that enables the transmission of both data and power over a single Ethernet cable. This device is particularly beneficial for powering edge devices such as IP cameras, VoIP phones, and wireless access points. It supports standard IEEE 802.3af and 802.3at PoE protocols, ensuring compatibility with a wide range of powered devices. The S-110PP is built to withstand harsh environmental conditions, featuring an industrial-grade design that is tested for reliability and durability.

The S-110P-SFP model introduces flexibility with its SFP (Small Form-factor Pluggable) slot, which allows users to customize their connection types by accommodating different SFP transceivers. This feature enables seamless integration into varying network environments, whether requiring fiber or copper connections. The S-110P-SFP also supports a wide range of data rates, making it suitable for high-speed applications.

On the other hand, the S-110P offers an excellent blend of performance and functionality with its compact design. This model is primarily focused on simple and effective media conversion, ensuring reliable data transmission between different media types, such as twisted pair and fiber optics. The S-110P is ideal for users looking to extend their network over long distances while maintaining high performance.

Lastly, the S-110PP-SFP combines the advantages of the previous models, providing both Power over Ethernet capabilities and the versatility of SFP slots. This hybrid approach not only enhances deployment options but also optimizes the use of existing network infrastructure. The S-110PP-SFP caters to businesses looking to modernize their networks with both power and connectivity solutions in a single, convenient package.

In summary, Perle Systems' S-110 series—comprising S-110PP, S-110P-SFP, S-110P, and S-110PP-SFP—offers a comprehensive suite of features. These devices are built for reliability, flexibility, and exceptional performance, addressing the diverse needs of modern network infrastructures. Whether extending network reach, powering devices, or accommodating varied connection types, the S-110 series is an excellent choice for networking professionals.