Perle Systems S-110PP-SFP, S-110P-SFP manual Error conditions

Page 15

100- (Copper Port)

On – 100 Mbps (valid link and detected speed is 100 Mbps) Off – 10 Mbps (if link is currently established)

LKC- (Link Status on Copper port)

On – Copper link is present

Off – No copper link present

Blinking (fast) – Copper link up and receiving data

PSE

Solid Green (Active) – The PSE has successfully detected a compliant PD and is applying power over UTP.

Solid Orange (Inactive) – The PSE is not active. The PSE has been configured to provide power, however

∙a compliant PD not detected - no power applied

∙a PSE has turned off power for Reset function

Off – (Disabled) The PSE function is disabled in the configuration.

Error conditions

A blinking red light is an error condition. The led light will cycle with a 3 second stop interval between the error condition code.

PSE-LED

 

1 blink

PD Capacitance too high

 

 

2 blinks

PD Resistance too low or short circuit

3 blinks

PD Resistance too high

15

Perle PoE/PoE+ 10/100 Ethernet Media Converter

 

Installation Guide

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 110P 110PP 110P-SFP Installation GuidePOE/POE+ OverviewPower Sourcing Pinouts InstallationPowering Options Jumper Settings UTP copper Power PoEPoE+ Bank DIP SwitchesDIP Switch Settings Bank Auto-negotiation copper SwitchSwitch Position Copper Port Link Pass-Through Mode Switch Switch Position ModeLink Pass-Through Behaviour Switch Position Type Far End Fault SwitchPSE Enable Copper Switch 4 Switch Position Fiber PortLoopback Fiber Switch PD Power Reset SwitchSpeed Copper Switch Duplex Copper SwitchDuplex Fiber Switch Installing the SFP Fiber Module Installing the Duplex Fiber CableAuto/MDIX Switch Installing the Simplex Fiber Cable Installing the Copper CableAttaching the Power Cord Strain Relief Clip Powering up the Perle Media Converter Operation Status LEDLED Pattern Error conditions Other Features Auto-MDIXPause Ieee 802.3xy Method TroubleshootingGeneral No connectivityNo Power to the PD Fiber Optic Specifications Technical SpecificationsEthernet Copper Cabling Requirements Fiber Cabling RequirementsFCC Compliance InformationContacting Technical Support Warranty / Registration

S-110PP-SFP, S-110P, S-110P-SFP, S-110PP specifications

Perle Systems is renowned for delivering robust networking solutions, particularly its series of media converters and network devices. Among these, the Perle S-110PP, S-110P-SFP, S-110P, and S-110PP-SFP stand out due to their remarkable features and technologies tailored for various networking requirements.

The Perle S-110PP is a PoE (Power over Ethernet) media converter that enables the transmission of both data and power over a single Ethernet cable. This device is particularly beneficial for powering edge devices such as IP cameras, VoIP phones, and wireless access points. It supports standard IEEE 802.3af and 802.3at PoE protocols, ensuring compatibility with a wide range of powered devices. The S-110PP is built to withstand harsh environmental conditions, featuring an industrial-grade design that is tested for reliability and durability.

The S-110P-SFP model introduces flexibility with its SFP (Small Form-factor Pluggable) slot, which allows users to customize their connection types by accommodating different SFP transceivers. This feature enables seamless integration into varying network environments, whether requiring fiber or copper connections. The S-110P-SFP also supports a wide range of data rates, making it suitable for high-speed applications.

On the other hand, the S-110P offers an excellent blend of performance and functionality with its compact design. This model is primarily focused on simple and effective media conversion, ensuring reliable data transmission between different media types, such as twisted pair and fiber optics. The S-110P is ideal for users looking to extend their network over long distances while maintaining high performance.

Lastly, the S-110PP-SFP combines the advantages of the previous models, providing both Power over Ethernet capabilities and the versatility of SFP slots. This hybrid approach not only enhances deployment options but also optimizes the use of existing network infrastructure. The S-110PP-SFP caters to businesses looking to modernize their networks with both power and connectivity solutions in a single, convenient package.

In summary, Perle Systems' S-110 series—comprising S-110PP, S-110P-SFP, S-110P, and S-110PP-SFP—offers a comprehensive suite of features. These devices are built for reliability, flexibility, and exceptional performance, addressing the diverse needs of modern network infrastructures. Whether extending network reach, powering devices, or accommodating varied connection types, the S-110 series is an excellent choice for networking professionals.
Top Page Image Contents