Omega Engineering OME-A8111 manual Product Check List, Programmable Timer/Counter, Applications

Page 9

1.3.7Programmable Timer/Counter

zType : 82C54 -8 programmable timer/counter

zCounters: The counter1 and counter2 are cascaded as a 32-bit pacer timer.

zPacer output : 0.00047 Hz to 0.5 MHz

zInput Gate : TTL compatible

zInternal Clock : 2 MHz

1.3.8Applications

zSignal analysis

zFFT & frequency analysis

zTransient analysis

zProduction test

zProcess control

zVibration analysis

zEnergy management

zIndustrial and laboratory measurement and control

1.4 Product Check List

In addition to this manual, the package includes the following items:

zOME-A-8111 multifunction card

zOME-A-8111 utility diskette/CD ROM

OME-A-8111 Hardware Manual (ver.1.1, Jul/2003)

7

Image 9

Contents User’sGuide Mexico CanadaBenelux Czech RepublicOME-A-8111 Table of Contents Calibration General Description FeaturesPower Consumption SpecificationsAnalog Inputs 3 A/D ConverterDA Converter Digital I/OInterrupt Channel Programmable Timer/Counter Product Check ListApplications Board Layout Hardware ConfigurationDefault base address is I/O Base Address Setting1 JP1 D/A Internal Reference Voltage Selection Jumper SettingAddress Read Write I/O Register Address2 A/D Input Buffer Register 8254 Counter4 D/I Input Buffer Register 3 D/A Output Latch Register6 A/D Gain Control Register Clear Interrupt Request7 A/D Multiplex Control Register SI2 SI1 SI0 8 A/D Mode Control Register9 A/D Software Trigger Control Register 10 D/O Output Latch Register CN3 Digital I/OCounter 8254 Timer/CounterSec A/D ConversionPacer Trigger Mode If switching from one channel to the next sec1 A/D conversion flow 2 A/D Conversion Trigger Modes3 A/D Transfer Modes Using software trigger and polling transferD/A Conversion Signal Shielding Analog Input Signal ConnectionCN1 Analog input/Analog output/Connect Pin Assignment Pin AssignmentCN3 Analog input/Analog output/Connect Pin Assignment CN2 Analog input/Analog output/Connect Pin AssignmentOME-CA-4002 Daughter BoardOME-DB-16P OME-DB-16RCalibration VR Description CalibrationDI/O Testing D/A Calibration StepsA/D Calibration Steps WARRANTY/DISCLAIMER Temperature