Omega DPF76, DPF78, DPF75 manual Remarks Press, Setting Relays, Presets

		PRGM	factorcount
		PRGM	rate	REMARKS
	PRESS		DISPLAY
THE			loc
STEP		PRGM	relaytot
5
SETTING
RELAYS		PRGM
		PRGM		This section sets up the relay information.
This step will only				Press the PRGM key to choose A TOT (A
			Aab##rateortot.#	assigned to total) or A RATE (A assigned to
appear on DPF75				rate). Press ENTER when the desired choice
		ENTER
				is displayed.
				This is the duration (.1 to 99.9 sec) that relay
				A will remain energized. If 00.0 is selected,
		ENTER		the relay will latch until reset.
This step will only				Press the PRGM key to choose B TOT (B
			bb##rateor .#	assigned to total) or B RATE (B assigned to
appear on DPF75				rate). Press ENTER when the desired choice
		ENTER
				is displayed.
			PREA	This is the duration (.1 to 99.9 sec) that relay
				B will remain energized. If 00.0 is selected,
		ENTER		the relay will latch until reset.
SETTING				PRE A = Preset A (Final Preset); The set point
			Followed by	at which output A will trigger. If the displayed
THE
		PRE A	last PRE A	value is not the desired preset, press the
PRESETS
			enteredPREB	key(s) under the digit to be changed.
				PRE B = Preset B (Prewarn); The set point at
			Followed by	which output B will trigger. If the displayed
			last PRE A	value is not the desired preset, press the
		PRE B
			entered	key(s) under the digit to be changed.

14