Omega Speaker Systems VR200 instruction manual Format SRp1, mode, p2, Example SR01, DI

2.2 Program Set Commands

Input range table

Input type	Range	Input	Measurement range	Unit
	20 mV	20 mV	-20.00 to 20.00 mV	mV
	60 mV	60 mV	-60.00 to 60.00 mV	mV
DC Voltage	200 mV	200 mV	-200.0 to 200.0 mV	mV
	2 V	2 V	-2.000 to 2.000 V	V
	6 V	6 V	-6.000 to 6.000 V	V
	20 V	20 V	-20.00 to 20.00 V	V

		Measurement range	Measurement range	2
Input type	Range			RECEIVING
		˚C	˚F
	R	0.0 to 1760.0 ˚C	32 to 3200° F
	S	0.0 to 1760.0˚C	32 to 3200° F
	B	0.0 to 1820.0˚C	32 to 3308° F
				FUNCTIONS
	K	-200.0 to 1370.0˚C	–328.0 to 2498.0° F
	E	-200.0 to 800.0˚C	–328.0 to 1472.0° F
T C	J	-200.0 to 1100.0˚C	–328.0 to 2012.0° F
	T	-200.0 to 400.0˚C	–328.0 to 752.0° F
	L	-200.0 to 900.0˚C	–328.0 to 1652.0° F
	U	-200.0 to 400.0˚C	–328.0 to 752.0° F
	N	0.0 to 1300.0˚C	32 to 2372° F
	W	0.0 to 2315.0˚C	–328.0 to 752.0° F
	JPT	-200.0 to 550.0˚C	–328.0 to 1112.0° F
R T D	PT	-200.0 to 600.0˚C	–328.0 to 1022.0° F
	CU1 to CU6*	-200.0 to 300.0˚C	–328.0 to 1112.0° F
	CU25*	-200.0 to 300.0˚C	–328.0 to 1022.0° F

* Allowed when the /N1 option (Cu10, Cu25) is equipped.

DI (Digital Input)

Format: SRp1, mode, p2

p1:	Channel number (CC)
mode:	DI (digital input)
p2:	Select the signal type from LEVL (level) or CONT (contact).

Example: SR01, DI, CONT

SCL (Scaling)

Format: SRp1, mode, p2, p3, p4, p5, p6, p7, p8

p1:	Channel number (CC)
mode:	SCL
p2:	Input type. VOLT, TC or RTD
p3:	Range
p4:	Low limit value of the display span (LOWER SPAN). Enter 5
	digits, excluding the decimal point and the + or – sign.
p5:	High limit value of the display span (UPPER SPAN). Enter 5
	digits, excluding the decimal point and the + or – sign.
p6:	Lower scale limit (SCL LOWER). Enter 6 digits, excluding the
	decimal point and the + or – sign.
p7:	Upper scale limit (SCL UPPER). Enter 6 digits, excluding the
	decimal point and the + or – sign.
p8:	Decimal point position of scaling value (0 to 4, which stands for
	the number of digits after the decimal point)

2 - 3