3.2 Output Data Formats
3.2.4 Output Format of Unit and Decimal Point Information
When receiving the TS2, ESC T, and LF commands, the VR200 recorder sends the information on the unit and decimal point in the following format. The channel numbers can be specified with the LF command.
, , CRLF
Decimal point position
This number indicates the number of digits after the decimal point (0 to 4).
Engineering unit (6 characters)
Channel number (2 characters)
Data status Space: Not the last data
E: End of data
N: Normal
D:Difference computation channel
S:Skipped channel
3 TRANSMITTING FUNCTIONS
3 - 5