Omnitron Systems Technology GX/TM2 user manual SFP Information

Page 31

SA

L2CP Control - iConverter GX/TM2

 

iConverter, Serial Agent

Identifier -

 

 

 

Chassis Number = 1

Slot Number = 1

Model Number = 8939N-0

1: Fiber L2CP Ingress Control

Forward

2: UTP L2CP Ingress Control

Forward

Enter Choice, Previous Screen(0), (H)elp, E(x)it >

Select the appropriate option to configure the module for the desired operation.

4.2.4SFP Information

The GX/TM2 module installed with an SFP will provide general and specific information on the SFP. This information is best viewed with SNMP management software. The following is the information available:

4.2.4.1SFP A0 Information Display

This section displays fixed SFP Module information for the following areas.

Identifier Values

Extended Identifier

Connector Values

Transceiver Codes

Encoding Rules

Normal Bit Rate

Link Length

Vendor Name

Vendor OUI

Vendor Revision Number

Laser Wavelength

Options

Vendor Serial Number

Date Code

Diagnostic Monitoring Type

Enhanced Options

SFF-8472 Compliance

4.2.4.2SFP A2 Information Display

This section displays decoded SFP data collected for the following statistics.

Measured Temperature

Measured Vcc

Measured Bias

Measured Tx Power

Measured Rx Power

Temperature High Alarm Setting

Temperature Low Alarm Setting

Temperature High Warning Setting

Temperature Low Warning Setting

Vcc High Alarm Setting

Vcc Low Alarm Setting

Vcc High Warning Setting

Vcc Low Warning Setting

Bias High Alarm Setting

Bias Low Alarm Setting

Bias High Warning Setting

Bias Low Warning Setting

Tx Power High Alarm Setting

Tx Power Low Alarm Setting

Tx Power High Warning Setting

Tx Power Low Warning Setting

Rx Power High Alarm Setting

Rx Power Low Alarm Setting

Rx Power High Warning Setting

Rx Power Low Warning Setting

SFP information can be obtained by selecting option 7 from the Port configuration screen.

Page 31

Image 31
Contents Standalone and PLUG-IN Module Table of Contents SA Standalone Plug-In OverviewPort Structure B B B B B B B Installation ProcedureConfiguring DIP-SWITCHES 1.2 SW2 UTP Auto/Manual Negotiation AN/Man 1.3 SW3 UTP Speed Gigabit/10-100 1000/10-100 This DIP-switch is for factory use only Installing the Module and Connecting Cables Passwords Management Options screen will be displayed GX/TM2 Setting IP Parameters as Dhcp Client Setting GX/TM2 Passwords Setting Snmp Preferences Setting SNMPv1/v2c Read and Write Community Names Setting the Snmp Trap IP Host Addresses Enabling/Disabling Soft-switch Reload Access the GX/TM2 Remotely Updating the GX/TM2 Firmware via the Serial Console Port Updating the GX/TM2 Firmware via FTP Verifying Operation NMM Detailed Module ConfigurationGX/TM2 UTP FDX LEDModule Management Mode Configuration Setting 17 Port Configuration UTP Layer 2 Control Protocol Filter SFP Information A167EC500000 5 802.3ah Parameters Page OUI Port Vlan Page Tagged Vlan BP a PvidUTP BP a BP B Vlan ID VIDVlan Table is Empty Vlan ID +1 Vlan ID CNode Loopback To refresh the Port Statistic screen, press Enter Cable Types GX/TM2 SpecificationsPossible Causes Troubleshooting GuideUTP Issues Limitation of Warranty Warranty

GX/TM2 specifications

Omnitron Systems Technology has long been at the forefront of networking solutions designed to enhance communication across various industries. One of their standout products is the GX/TM2, an innovative device that caters to the evolving demands of modern network environments.

The GX/TM2 is a robust and flexible media converter designed to facilitate seamless integration between different types of network media. This device supports a wide range of Ethernet technologies, making it an ideal choice for organizations looking to bridge fiber optic and copper connections. It is particularly valuable for enterprises that need to expand or upgrade their network architecture without overhauling existing infrastructure.

One of the main features of the GX/TM2 is its compatibility with both Fast Ethernet (10/100 Mbps) and Gigabit Ethernet (10/100/1000 Mbps). This versatility allows users to choose the speed that best suits their operational needs, ensuring they can accommodate varying bandwidth requirements. Additionally, the device supports a range of fiber types, including multimode and single-mode fibers, extending transmission distances significantly—some models can achieve reach up to 120 kilometers.

The GX/TM2 incorporates advanced technologies, including auto-negotiation, which automatically detects and configures the parameters of the connected network. This feature minimizes setup time and reduces the risk of manual configuration errors. Another valuable technology is the built-in management interface, which allows for real-time monitoring and diagnostics, helping network administrators maintain optimal performance and troubleshoot issues quickly.

Moreover, the GX/TM2 is designed with reliability in mind. It features robust hardware construction, which makes it resistant to environmental factors, ensuring dependable operation in diverse settings. Its compact form factor and modular design make it easy to deploy and integrate into existing network systems, optimizing space and performance.

Overall, the Omnitron GX/TM2 stands out as a comprehensive solution for organizations seeking to enhance their network capabilities. With its advanced features, wide compatibility, and emphasis on reliability, it empowers businesses to build efficient, high-performance networks that can adapt to changing technological landscapes. Whether for upgrading legacy systems or deploying new network expansions, the GX/TM2 provides the flexibility and performance necessary for modern connectivity demands.