Introduction
Overview
The Omega Engineering OMG-COMM+232.PCIis a two channel PCI Bus serial I/O adapter for the PC and compatibles. It provides two RS-232 serial ports supporting data rates up to 460.8K bps.
The OMG-COMM+232.PCIworks seamlessly with the standard operating system serial driver. UART upgrades are available providing 32 and 64 byte FIFOs.
What’s Included
The OMG-COMM+232.PCIis shipped with the following items. If any of these items are missing or damaged, contact the supplier.
∙OMG-COMM+232.PCISerial I/O Adapter
∙Serial Utility Software
∙User Manual
Factory Default Settings
The OMG-COMM+232.PCIfactory default settings are as follows:
Port # | Clock Mode |
Port 1 | DIV4 |
Port 2 | DIV4 |
To install the OMG-COMM+232.PCIusing factory default settings, refer to Installation on page 7.
For your reference, record installed OMG-COMM+232.PCIsettings below:
Port 1
Port 2
Omega Engineering COMM+232.PCI | Page 1 |
