3.17Parameter save
P - M o d e | - - - - |
|
|
Saves the following parameters so that they become the default parameters when the tape deck is next powered up:
•Single Play
•Skip Play
•Repeat Mode
When this menu item is first displayed, the right side of the display shows:
settings, turn the DATA dial [20], so that the display shows Save, and press ENTER [27].
3.18Initializing settings
* D a t a * | - - - - |
|
|
Resets all menu values to their default settings except for the head time, (see 3.1, "Drum time (head time)"), which cannot be reset.
To reset the values to default, turn the DATA dial
[20]so that the display shows Init. and press
ENTER [27].
3 - Menu functions
If the screen shows Init.in error, turn the DATA dial again so that the display shows
3.19Viewing points at which block errors have occurred
ABS
0 0H 2 3M 0 8S _ 3 2F # 1
This display is shown if the MENU key is pressed once more following the reset screen above.
This displays up to five points in ABS time format where more than one block error has occurred within a frame. Turn the DATA dial to view the five points at which these errors have occurred. Turning the dial clockwise after error #5 will show the total number of such errors (up to a total of 99 errors).
While a block error time is shown on the display, pressing the LOC 2 key will write the error location to the second location memory and start locating the tape to that point.
While any of the locations or the total number of the tape errors menu is shown on the display, the infor- mation can be cleared by pressing the MARGIN RESET key. Ejecting the tape will also clear this data.
TASCAM