Speed/Disable: | This field has six |
| Full, 10M Half, Auto and |
| port disable selections. |
Flow Control: | This setting determines whether or not the Switch will be |
| handling flow control. Set Flow Control to Enable to |
| avoid data transfer overflow. Sets Flow Control to |
| Disable if you do not require flow control or if this is |
| controled by another hardware/software management |
| device. |
| When the port is set to forced mode, then the flow |
| control will automatically set to Disable. |
QoS: | In ports that require a high priority to manage the data |
| transfer, QoS should be set to high. Set the QoS to |
| Normal for ports that do not need to have a high priority |
| for transferring data. |
VLAN Settings (Virtual Local Area Network)
Group individual ports into a small “Virtual” network of their own to be independent of the other ports. To add a VLAN group, press the “Add Group” button.
Figure 19. VLAN Group Settings
The new VLAN Setting configuration window will be displayed. Select the ports you wish to group together and give them a description name. Once you want to modify the VLAN Group, check on the ID parameter, the ID VLAN configuration window will be displayed.
NetComm 16 or 24 port Gigabit Switch | YML711 Rev1 |
26 | www.netcomm.com.au |