Backup Setting
The backup setting tools help you to backup the current setting of the Switch. Once you need to backup the setting, click on the “Backup” button to save the setting.
To restore a previous setting file to the device, identify the backup file and click on the “Restore” button to proceed with restoring the settings of the recorded file.
Figure 28. Backup Setting
Note: | When restoring a recorded file, the current password will not be erased. |
|
|
Reset Setting
The Factory Reset button helps you to reset the device back to the default setting from the factory. Be aware that the entire configuration will be reset, the IP address of the device will be set to default setting 192.168.0.1.
Figure 29. Reset Setting
YML711 Rev1 | NetComm 16 or 24 port Gigabit Switch |
www.netcomm.com.au | 33 |