NetComm NP3024 manual Device Setting, After completing the details, type a password

Device Setting

The Device Setting panel allows you to control the configuration of your new Switch.

Configuration Setting:	The Configuration Setting allows you to set the IP
	Address, Subnet Mask, Gateway, Set Trap to (Trap IP
	Address), System name and Location.
	Select the device in the Discovery list or Monitor List and
	the click on the Configuration Setting button. The
	Configuration Setting window will be displayed (refer to
	Figure 9). After completing the details, type a password
	and press the “Set” button to apply the changes.

	Figure 9. Configuration Setting
Password Change:	The password can be changed by clicking on the
	“Password Change” button. Enter the original password
	and the new password and confirm it. Click on the “Set”
	button to apply the change.

Figure 10. Password Change

YML711 Rev1	NetComm 16 or 24 port Gigabit Switch
www.netcomm.com.au	19