NETGEAR N300 Wireless Mini USB Adapter WNA3100M
Join a Network or Connect to a Different Network
You can use WPS to join a wireless network if your wireless network supports it, or you can join a wireless network from this NETGEAR Genie screen.
•WPS. Press and hold the WPS button on the side of the adapter for 2 seconds. Then within 2 minutes, press the WPS button on your wireless router or gateway.
•NETGEAR Genie: Click your wireless network to select it from the list, and then click Connect. If the network is secure, enter its password or network key.
After the adapter joins the network, it automatically saves the network connection information to a Windows profile. Windows profiles can be used by Genie and the Windows utility. The next time you launch NETGEAR Genie, it will automatically connect to the network you previously joined if there's no change in the network information.
To use WPS to join a wireless network:
1. Press and hold the WPS button on the side of the adapter for 2 seconds.
2.Then within 2 minutes, press the WPS button on your wireless router or gateway
The adapter joins the network, which can take a few minutes. Your settings are saved in a profile.
Set Up Your Wireless Adapter
10