User Manual for the NETGEAR RangeMax™ Wireless USB 2.0 Adapter WPN111
A Passphrase is used to automatically generate the WEP hexadecimal numbers for the key. If the wireless network Access Point uses a Passphrase, you can also use that here. Otherwise, you will have to manually enter the hexadecimal numbers.
WEP Hexadecimal Numbers: ______________________________
The WEP Hexadecimal Numbers are needed if a Passphrase is not used in the wireless network access point, but rather if the key is manually entered.
Use the procedures below to configure basic security settings in the WPN111.
How to Configure WEP Encryption Security
Follow the steps below to configure WEP Encryption Security.
1.Run the WPN111 Configuration Utility.
a.Make sure the WPN111 software is installed and the WPN111 is connected to your PC.
b.Open the configuration utility by clicking on the WPN111 icon in the Windows system tray.
c.Click on the Settings tab to display the view shown below.
Figure 4-5: WEP security
2.Configure the Security settings.
a.Select WEP.
b.Enter the SSID. This is also called the Wireless Network Name.
Note: You will not get a wireless network connection unless the network SSID matches exactly what is configured in the access point.
4 | C on figu ra tion |