NETGEAR WG111V2 user manual V3.0, January

Page 28

NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v2 User Manual

3.Save your settings in a Profile.

a.Click Save Profile.

All the configuration settings are saved in this profile.

b.Click Apply.

c.Click Close to exit the Smart Wizard, or Cancel to return to the previous settings.

4.Configure the PC network settings.

a.Configure each PC with either a static IP address or with the IPX protocol.

b.Restart the PCs.

5.Verify wireless connectivity between your peer devices.

You can use the ping utility to verify your wireless connection

a.On the Windows taskbar click Start, and then click Run.

b.Assuming the target PC is configured with 192.168.0.1 as its IP address, type ping -t 192.168.0.1 and then click OK.

Figure 16

c.This sends a continuous ping to the device with the 192.168.0.1 static IP address. The ping response should change to “reply.”

Figure 17

18

v3.0, January 2007

Image 28

Contents Netgear 54 Mbps Wireless USB 2.0 Adapter NETGEAR, IncTechnical Support SAR Statement RF Exposure InformationΚΑΙ ΤΙΣ Λοιπεσ Σχετικεσ Διαταξεισ ΤΗΣ Οδηγιασ 1999/5/ΕΚ Product and Publication Details V3.0, January Contents Default Configuration Settings and Technical Specifications About This Manual Audience, Conventions, and ScopeV3.0, January Basic Setup Observe Wireless Location and Range GuidelinesWhat You Need Before You Begin Verify System RequirementsWhat Is in the Box Default Wireless SettingsInstallation Instructions V3.0, January V3.0, January Connecting to Wireless Networks and the Internet Connection Indicator Description Smart Wizard Status BarIcon Colors Placing the USB Adapter CradleColor Condition Description Removing the Software Upgrading the Wireless Adapter Software Go to http//kbserver.netgear.comNetwork Connections and Wireless Security Disabling the Windows Zero Configuration UtilityViewing Wireless Networks in Your Area Understanding the Smart WizardV3.0, January Finding a Network Profiles Adding ProfilesV3.0, January Setting up a Computer-to-Computer Ad Hoc Profile V3.0, January Starting a Computer-to-Computer Ad Hoc Network Connection Wireless Security Know Your Wireless Network SettingsWireless Network Name Ssid and Security Settings If WEP Authentication is UsedSetting up WEP Encryption Security Setting up WPA2-PSK Security Setting up WPA-PSK Security Advanced Settings Statistics About V3.0, January Troubleshooting Troubleshooting TipsFrequently Asked Questions Smart Wizard keeps asking me to save my settingsAd Hoc mode is not working correctly Cannot connect to the AP that I want from the Networks TabWireless Adapter is not getting an IP address Why do I see two Wireless Adapter icons in the System Tray?V3.0, January Feature Description Smart Wizard Default Configuration SettingsWireless Technical Specifications LEDRelated Documents Document LinkV3.0, January