NETGEAR WG111V2 user manual Setting up WPA2-PSK Security

Page 33

NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v2 User Manual

4.Select Create with Passphrase and enter the passphrase. The configuration utility will automatically generate the WEP keys.

Note: The characters are case sensitive. Be sure to use the same passphrase for all the wireless devices in the network.

If the passphrase method is not available in the other devices, you must manually enter the keys to match exactly what is in the access point and other 802.11b wireless devices.

5.Save your settings in a Profile.

a.Click Save Profile. All the configuration settings are saved in this profile.

b.Click Apply.

c.Click Close to exit the configuration utility.

Setting up WPA2-PSK Security

Follow the steps below to configure WPA2-PSK Security.

1.Run the Wireless Adapter Smart Wizard.

a.Make sure the software is installed and the Wireless Adapter is fully inserted in a USB port in your computer.

b.Use the icon to open the Smart Wizard. The Settings tab page opens.

Figure 20

2.Configure the Security settings.

a. In the Profile box, select the profile or type in a profile name.

23

v3.0, January 2007

Image 33

Contents NETGEAR, Inc Netgear 54 Mbps Wireless USB 2.0 AdapterTechnical Support RF Exposure Information SAR StatementΚΑΙ ΤΙΣ Λοιπεσ Σχετικεσ Διαταξεισ ΤΗΣ Οδηγιασ 1999/5/ΕΚ Product and Publication Details V3.0, January Contents Default Configuration Settings and Technical Specifications Audience, Conventions, and Scope About This ManualV3.0, January Observe Wireless Location and Range Guidelines Basic SetupWhat You Need Before You Begin Verify System RequirementsDefault Wireless Settings What Is in the BoxInstallation Instructions V3.0, January V3.0, January Connecting to Wireless Networks and the Internet Smart Wizard Status Bar Connection Indicator DescriptionPlacing the USB Adapter Cradle Icon ColorsColor Condition Description Removing the Software Go to http//kbserver.netgear.com Upgrading the Wireless Adapter SoftwareDisabling the Windows Zero Configuration Utility Network Connections and Wireless SecurityUnderstanding the Smart Wizard Viewing Wireless Networks in Your AreaV3.0, January Finding a Network Adding Profiles ProfilesV3.0, January Setting up a Computer-to-Computer Ad Hoc Profile V3.0, January Starting a Computer-to-Computer Ad Hoc Network Connection Know Your Wireless Network Settings Wireless SecurityIf WEP Authentication is Used Wireless Network Name Ssid and Security SettingsSetting up WEP Encryption Security Setting up WPA2-PSK Security Setting up WPA-PSK Security Advanced Settings Statistics About V3.0, January Troubleshooting Tips TroubleshootingFrequently Asked Questions Smart Wizard keeps asking me to save my settingsCannot connect to the AP that I want from the Networks Tab Ad Hoc mode is not working correctlyWhy do I see two Wireless Adapter icons in the System Tray? Wireless Adapter is not getting an IP addressV3.0, January Default Configuration Settings Feature Description Smart WizardWireless LED Technical SpecificationsDocument Link Related DocumentsV3.0, January