NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v2 User Manual
Setting up WEP Encryption Security
Follow the steps below to configure WEP Encryption Security.
1.Run the Wireless Adapter Smart Wizard.
a.Make sure the software is installed and the Wireless Adapter is into the USB port in your computer.
b.Use the 
icon to open the Smart Wizard. The Settings tab page opens.
Figure 19
2.Configure the Security settings.
a.In the Profile box, select the profile or type in a profile name.
b.In the Network Name (SSID) field select the network, or enter the SSID.
Note: You will not get a wireless network connection unless the network SSID matches exactly what is configured in the access point.
c. In the Security section, select WEP.
3.Select the WEP encryption strength you will use. The choices are:
•
•
Note: The
22