NETGEAR WG111V2 user manual Setting up WPA-PSK Security

Page 34

NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v2 User Manual

b.In the Network Name (SSID) field select the network, or enter the SSID.

Note: You will not get a wireless network connection unless the network SSID matches exactly what is configured in the access point.

c.In the Security section, select WPA2-PSK [AES].

For more information about WPA2-PSK security, see the Web link to “Wireless Communications” on page 35.

3.Save your settings in a Profile.

a.Click the Save Profile button. All the configuration settings are saved in this profile.

b.Click Apply.

c.Click Close to exit the Smart Wizard.

Setting up WPA-PSK Security

Follow the steps below to configure WPA-PSK Security.

1.Run the Wireless Adapter Smart Wizard.

a.Make sure the software is installed and the Wireless Adapter is fully inserted in a USB port in your computer.

b.Use the icon to open the Smart Wizard. The Settings tab page opens.

Figure 21

2.Configure the Security settings.

a. In the Profile box, select the profile or type in a profile name.

24

v3.0, January 2007

Image 34

Contents Netgear 54 Mbps Wireless USB 2.0 Adapter NETGEAR, IncTechnical Support SAR Statement RF Exposure InformationΚΑΙ ΤΙΣ Λοιπεσ Σχετικεσ Διαταξεισ ΤΗΣ Οδηγιασ 1999/5/ΕΚ Product and Publication Details V3.0, January Contents Default Configuration Settings and Technical Specifications About This Manual Audience, Conventions, and ScopeV3.0, January What You Need Before You Begin Basic SetupObserve Wireless Location and Range Guidelines Verify System RequirementsWhat Is in the Box Default Wireless SettingsInstallation Instructions V3.0, January V3.0, January Connecting to Wireless Networks and the Internet Connection Indicator Description Smart Wizard Status BarIcon Colors Placing the USB Adapter CradleColor Condition Description Removing the Software Upgrading the Wireless Adapter Software Go to http//kbserver.netgear.comNetwork Connections and Wireless Security Disabling the Windows Zero Configuration UtilityViewing Wireless Networks in Your Area Understanding the Smart WizardV3.0, January Finding a Network Profiles Adding ProfilesV3.0, January Setting up a Computer-to-Computer Ad Hoc Profile V3.0, January Starting a Computer-to-Computer Ad Hoc Network Connection Wireless Security Know Your Wireless Network SettingsWireless Network Name Ssid and Security Settings If WEP Authentication is UsedSetting up WEP Encryption Security Setting up WPA2-PSK Security Setting up WPA-PSK Security Advanced Settings Statistics About V3.0, January Frequently Asked Questions TroubleshootingTroubleshooting Tips Smart Wizard keeps asking me to save my settingsAd Hoc mode is not working correctly Cannot connect to the AP that I want from the Networks TabWireless Adapter is not getting an IP address Why do I see two Wireless Adapter icons in the System Tray?V3.0, January Feature Description Smart Wizard Default Configuration SettingsWireless Technical Specifications LEDRelated Documents Document LinkV3.0, January