NETGEAR WG111U Connecting to Another PC in Ad-hoc Mode, How to Configure an Ad-hoc Mode Profile

Page 42

User’s Manual for the NETGEAR Super AG Wireless USB 2.0 Adapter WG111U

4.Verify wireless connectivity to your network.

Verify connectivity by using a browser such as Netscape or Internet Explorer to connect to the Internet, or check for file and printer access on your network.

You can check the status bar in the configuration utility for the current connection status.

Note: If you cannot connect, see Chapter 6, “Troubleshooting”. Also, for problems with accessing network resources, the Windows Client and File and Print Sharing software might not be installed and configured properly on your computers. Please refer to “Preparing Your Computers for TCP/IP Networking” on page C-4.

Connecting to Another PC in Ad-hoc Mode

The peer-to-peer setting of the WG111U uses Ad-Hoc mode. Ad-Hoc mode is an 802.11 networking framework in which devices or computers communicate directly with each other, without the use of an access point. For example, this mode is used when two Windows computers are configured with file and print sharing enabled and you want to exchange files directly between them.

How to Configure an Ad-hoc Mode Profile

Note: Ad-hoc mode will not work using DHCP settings. Ad-hoc mode requires static IP addresses (such as 192.168.0.1). For instructions on setting up static IP addresses on a Windows PC, refer to the PC Networking Tutorial included on the NETGEAR Super AG Wireless USB 2.0 Adapter WG111U Resource CD.

Follow the instructions below to configure an Ad-hoc mode profile.

1.Configure the PC network settings.

a.Configure each PC with a static IP address or with the IPX protocol.

Note: For instructions on configuring static IP addresses, refer to the networking tutorial on your NETGEAR Super AG Wireless USB 2.0 Adapter WG111U Resource CD.

b.Restart the PCs.

2.Run the WG111U Smart Wireless Wizard.

a.Make sure the WG111U software is installed and the WG111U is connected to your PC.

b. Open the configuration utility by clicking on the WG111U icon	on the Windows
desktop or in the system tray. The Settings page opens.

4-4	Configuration

202-10065-01

Image 42

Contents 202-10065-01 Technical Support Certificate of the Manufacturer/ImporterFCC Guidelines for Human Exposure Declaration Of ConformityFCC Requirements for Operation in the United States Operation Using 2.4 GHz Channels in France Export RestrictionsMetropolitan Regions with Eased Restrictions in 2.4GHz Band Operation Using 5 GHz Channels in the European Community Allowed 5GHz Channels in Each European Community CountryVii Viii Contents Chapter Configuration Appendix C Preparing Your Network to Work with a Router Glossary Index Audience, Scope, Conventions Manual SpecificationsChapter About This Manual Typographical conventionsHow to Use this Manual Html version of this manualHow to Print this Manual About This Manual Chapter Introduction About the WG111UKey Features 802.11a and 802.11b/g Wireless NetworkingComparison of Wireless Modes Comparing the 802.11a, 802.11b, and 802.11g ModesRoad Map for ‘How to Get There From Here’ What’s in the Box?Road Map for How to Get There From Here If I Want To? What’s Needed? What Do I Do? How Do I?Netgear Super AG Netgear Super AG Wireless Wired network Wirelessly connect Chapter Basic Setup What You Need Before You BeginVerifying System Requirements Determining Placement of the USB Adapter Observing Location and Range GuidelinesTwo Basic Operating Modes Attach fastener to back of plastic cradleWG111U Default Wireless Configuration Settings Basic Installation InstructionsFor Windows XP Users Installing a WG111U Install the Netgear Super AG Wireless USB 2.0 Adapter WG111U Configure your WG111U Verify wireless connectivity to your network For Windows 2000, ME, and 98SE Users Installing a WG111U Found New Hardware Wizard WG111U System Tray Icon Configure your WG111U WG111U Wireless Connection Indicators Interpreting the LED on the WG111U Status LEDLED Descriptions Red Interpreting System Tray Icon ColorsColor Condition Description YellowChapter Configuration Understanding the Configuration OptionsUsing Configuration Profiles Connecting to an Access Point in Infrastructure Mode How to Configure an Infrastructure Mode ProfileRun the WG111U Smart Wireless Wizard Configure the wireless network settings Save your settings in a ProfileConnecting to Another PC in Ad-hoc Mode How to Configure an Ad-hoc Mode ProfileConfigure the PC network settings Ad-Hoc Setting dialog box Ping -t 192.168.0.1 and then click OK What’s on the Statistics Page? StatisticsUnderstanding the Advanced Settings Advanced SettingsEuropean Regulatory Requirements for Transmit Power Control TPC Configuration ProcedureConfiguration Chapter Wireless Security Configuration Understanding the Security OptionsUsing WEP Security Basic Requirements for WEPWEP Security Settings Worksheet Wireless Network Name SsidWEP Security Encryption Key How to Configure WEP Encryption Security Configure the Network Name Ssid settingsConfigure the WEP settings Using WPA-PSK Advanced Security Basic Requirements for WPA-PSKWPA-PSK Security Settings Worksheet How to Configure WPA-PSK Advanced SecurityConfigure the WPA-PSK settings WPA-PSK settings screenWireless Security Configuration Chapter Troubleshooting Basic TipsFrequently Asked Questions Ad Hoc mode is not working correctlyGeneral Questions How to use XP’s own Wireless configuration utility New Hardware Wizard appears after installation has completedTroubleshooting Appendix a Technical Specifications USBTechnical Specifications Appendix B Wireless Networking Basics Wireless Networking OverviewInfrastructure Mode Ad Hoc Mode Peer-to-Peer Workgroup Network Name Extended Service Set Identification EssidWireless Channels Radio frequency channels used are listed in Table B-1 Table B-1 802.11g Radio Frequency ChannelsWEP Wireless Security WEP AuthenticationAccess point have the same WEP are described below Authentication Shared Key Steps Key Size and Configuration WPA Wireless Security How to Use WEP ParametersHow Does WPA Compare to WEP? What are the Key Features of WPA Security? How Does WPA Compare to Ieee 802.11i?Wireless Networking Basics Login Authentication Figure B-3 WPA OverviewFigure B-4 802.1x Authentication Sequence WPA Data Encryption Key Management Temporal Key Integrity Protocol Tkip Is WPA Perfect? Supporting a Mixture of WPA and WEP Wireless ClientsChanges to Wireless Access Points Product Support for WPANew WPA information element WPA two-phase authenticationChanges to Wireless Network Adapters MichaelChanges to Wireless Client Programs What You Need To Use a Router with a Broadband Modem Computer Network Configuration RequirementsAppendix C Preparing Your Network to Work with a Router Cabling and Computer HardwareInternet Configuration Requirements Where Do I Get the Internet Configuration Parameters?Record Your Internet Connection Information Preparing Your Computers for TCP/IP Networking Configuring Windows 95, 98, and Me for TCP/IP Networking Installing or Verifying Windows Networking ComponentsInstalling a New Adapter Installing TCP/IP Installing the Client for Microsoft NetworksVerify the Configuration Settings Open the Network PanelSelecting the Windows’ Internet Access Method Verify the Properties IP Address SettingVerifying TCP/IP Properties Configuring Windows NT4, 2000 or XP for IP Networking Open the Network Connection Window Configuring Dhcp of TCP/IP in Windows XP, 2000, or NT4Dhcp Configuration of TCP/IP in Windows XP Go to the Network Connection Status windowGo to Properties Set Dhcp for TCP/IPDhcp Configuration of TCP/IP in Windows Check the Local Area Connection Properties SettingsComplete the configuration Check the Internet Protocol PropertiesDhcp Configuration of TCP/IP in Windows NT4 Go to TCP/IP PropertiesVerifying TCP/IP Properties for Windows XP, 2000, and NT4 Set the TCP/IP PropertiesConfiguring the Macintosh for TCP/IP Networking MacOS 8.6 orMacOS Verifying the Readiness of Your Internet Account Verifying TCP/IP Properties for Macintosh ComputersAre Login Protocols Used? What Is Your Configuration Information?Select the Gateway tab Restarting the Network Glossary Glossary-2 Glossary Glossary-3 Glossary-4 Glossary Glossary-5 Glossary-6 Index NumericsIndex-2