NETGEAR WG111U WPA-PSK Security Settings Worksheet, How to Configure WPA-PSK Advanced Security

User’s Manual for the NETGEAR Super AG Wireless USB 2.0 Adapter WG111U

WPA-PSK Security Settings Worksheet

Print this form, fill in the configuration parameters and put it in a safe place for possible future reference. For an existing wireless network, the person who set up the network will be able to provide this information.

•Wireless Network Name (SSID)

The Service Set Identification (SSID) identifies the wireless local area network.

Note: Some wireless access points will not broadcast their SSID as a security feature. In such a case, you will need to get the SSID from the wireless network administrator.

Wireless network name (SSID): ______________________________

•Passphrase (Pre-Shared Key): ________________________________________

How to Configure WPA-PSK Advanced Security

Follow the steps below to configure WPA-PSK Advanced Security.

1. Run the WG111U Smart Wireless Wizard.

a.Make sure the WG111U software is installed and the WG111U is fully inserted in the USB port of your PC.

b. Open the configuration utility by clicking on the WG111U icon	on the Windows
desktop or in the system tray. The Settings page opens.

2.Configure the Network Name (SSID) settings.

Enter the SSID. This is also called the Wireless Network Name.

Tip: Click the Networks tab to view a list of the available wireless networks and their SSIDs.

5-6 Wireless Security Configuration

202-10065-01